Abstract:Lithium metal is considered as a potential anode for lithium batteries, but its commercialization process is hindered by several problems, including uncontrollable lithium dendrite growth, large volume expansion, low utilization of lithium and so on. To address these issues, in this work, lithiophilic silver layers with 80 nm thickness are coated on the commercial carbon cloth (CC) using thermal evaporation method to regulate Li growth during lithium plating process. We find that the uniformly distributed silver layers can successfully reduce lithium nucleation over-potential, thus inducing the homogeneous deposition of metal Li, supported by density functional theory calculation. Benefited from the as prepared lithiophilic Ag layers, the CC/Ag/Li anode with an ultrahigh areal capacity of 16 mAh cm(-2) is achieved adopting electrochemical deposition at 0.2 mA cm(-2) without the formation of lithium dendrites, which is confirmed by continuous detection using visual discrimination and scanning electron microscope observation. As a result, a stable dendrite-free CC/Ag/Li anode exhibits excellent electrochemical properties: (1) the assembled CC/Ag/Li symmetrical cell maintains a stable voltage hysteresis within 25 mV after cycling 750 hat a current density of 1 mA cm(-2); (2) The assembled CC/Ag/Li-LiFePO4 cell also demonstrates enhanced electrochemical behaviors in terms of rate performance and capacity retention; (3) When coupled with a carbon/sulfur cathode, the CC/Ag/Li anode also demonstrates excellent compatibility. The initial discharge capacity of the CC/Ag/Li-S cell is 899.3 mAh g(-1) at 0.2C, the reversible capacity retains a value of 587.7 mAh g(-1) after 400 cycles, corresponding to a capacity attenuation rate of 0.075% per cycle.

DC Magnetron Sputtering Prepared AgC Thin Film Anode for Thin Film Lithium Ion Microbatteries

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Magnetron Sputtering Sn-Ag-O Thin Film Anodes For Rechargeable Lithium Ion Batteries

Magnetron Sputtering Amorphous Carbon Coatings on Metallic Lithium: Towards Promising Anodes for Lithium Secondary Batteries

Cyclic Durable High-Capacity Sn/Cu6Sn5 Composite Thin Film Anodes for Lithium Ion Batteries Prepared by Electron-Beam Evaporation Deposition

Preparation and Study on Si/Ag/C Composite As Anode Material for Lithium Ion Batteries

Study on antimony thin film used as anode material in lithium-ion batteries

Fabrication of Tin-Carbon Composite Anode Material by Electrospinning and Electrostatic Spray Deposition for Lithium Rechargeable Battery

Preparation and performance of tin alloy film anode materials for lithium-ion battery

Electrodeposition Behavior of Lithium Metal on Carbon Substrates with Surface Silvering

Micro-sized nano-porous Si/C anodes for lithium ion batteries

Study of Lithiation Mechanisms of High Performance Carbon-Coated Si Anodes by In-Situ Microscopy

Electrostatic Spray Deposition of Nanoporous Coo/Co Composite Thin Films As Anode Materials for Lithium-Ion Batteries

Regulating lithium nucleation and deposition on carbon cloth decorated with vertically aligned Ag-doped MnO 2 nanosheet arrays for dendrite-free lithium metal anode

The Effect of Silver Particle Distribution in a Carbon Nanocomposite Interlayer on Lithium Plating in Anode-Free All-Solid-State Batteries

Regulating Lithium Nucleation and Deposition on Carbon Cloth Decorated with Vertically Aligned Ag-doped MnO2 2 Nanosheet Arrays for Dendrite-Free Lithium Metal Anode

Ag/microcrystalline-Cu2O composite film as an interfacial regulator for highly reversible lithium metal anode

High-performance Ti-doped ZnS thin film anode for lithium-ion batteries

Electrochemical Characteristics and Intercalation Mechanism of ZnS/C Composite As Anode Active Material for Lithium-Ion Batteries

Magnetron Sputtering Silicon Thin Film Electrodes for Lithium-Ion Batteries

Characterizations of Al–Y Thin Film Composite Anode Materials for Lithium-Ion Batteries