Abstract:Zircaloy-4 is used as a fuel cladding material for water reactors, as it has good mechanical properties, corrosion resistance, and a low thermal neutron absorption cross section. However, the mechanical performance of Zircaloy-4 can be reduced during service due to hydrogen uptake and hydride formation. These hydrides are brittle, and often reduce the strength and toughness of materials as well as increase susceptibility to delayed hydride cracking (DHC). In this work, large grain Zircaloy-4 with hydrides was prepared and then cross sectioned using cryo-ion beam polishing, using plasma focused ion beam (pFIB) and broad ion beam (BIB) approaches to enable the preparation of a very high quality flat surface with no preferential etching of either the hydride or zirconium metal (typically metallographic polishing preferentially removes hydrides). Conventional and high angular resolution electron backscatter diffraction (EBSD) analysis were then used to explore morphology, deformation fields, and orientation relationships between the zirconium matrix and hydrides. Four maps were collected for analysis which included hydrides near grain boundaries: (a) where the hydride smoothly decorates across two of the connecting boundaries near a triple junction; (b) where the hydride smoothly decorates the boundary; (c) a mixture of smooth decoration of the interface and protrusion into the grains; (d) fine scale hydride that protrudes into one grain. This work highlights that incompatibility of the hydride within the zirconium matrix is strongly linked to the orientation relationship of the hydride and matrix, and the grain boundary character. These results may enable enhanced understanding of the role of hydrides in fracture as well as stress-induced hydride reorientation and DHC susceptibility.

Deformation behavior of hydrides in zircaloy-4 under biaxial fatigue

Deformation behavor of hydride in zircaloy-4

In-situ EBSD analysis of hydride phase transformation and its effect on micromechanical behavior in Zircaloy-4 under uniaxial tensile loading

In Situ Observation of Tensile Deformation in the Recrystallized Zircaloy-4 after Hydridization

Influence of Hydride Precipitation on Mechanical Behavior of Zircaloy-4 Sheets and FEM Simulation

Effect of hydrogen-charged treatment on the biaxial cyclic deformation behavior of cold-worked ziraloy-4.

Slip-hydride interactions in Zircaloy-4: Multiscale mechanical testing and characterisation

Hydride precipitation dependence on α-parent orientation and plastic deformation in zirconium alloys

Microstructure and formation mechanisms of δ-hydrides in variable grain size Zircaloy-4 studied by electron backscatter diffraction

Characterization of local deformation around hydrides in Zircaloy-4 using conventional and high angular resolution electron backscatter diffraction

Cyclic deformation behavior and dislocation substructures of hexagonal Zircaloy-4 under Out-of-Phase loading

Revealing the role of hydrogen content on the mechanical behavior and cracking mechanisms of Zircaloy-4 under strain

On the mechanism of zircaloy-4 fatigue-deformation under different heat-treatment conditions

NUMERICAL ANALYSIS FOR THE DEFORMATION BEHAVIOR OF HYDRIDED ZIRCALOY-4 UNDER BIAXIAL PROPORTIONAL LOADING

The effect of δ-hydride on the micromechanical deformation of Zircaloy-4 studied by in situ high angular resolution electron backscatter diffraction

Effect of hydrogen contents on the mechanical properties of Zircaloy-4

Cyclic deformation behavior of zircaloy-4 at different temperatures

Hydride-enhanced strain localization in zirconium alloy: a study by crystal plasticity finite element method

Biaxial low cycle fatigue properties and dislocation substructures of zircaloy-4 under in-phase and out-of-phase loading

Structural Stability and Compressive Behavior of Zrh2 under Hydrostatic Pressure and Nonhydrostatic Pressure

Biaxial Low Cycle Fatigue Properties of Zircaloy-4 under Tension-Torsional Proportional Loading