Abstract:The effective recovery of metallic iron and vanadium from steel slag and ensuring the gelling properties of the residual slag after metal separation are crucial for their high-value-added utilisation. In this study, we established suitable process conditions for high-temperature reduction and reconstruction using the Si/Al ratio as an adjustment parameter and employing rice husk ash, SiO 2 , and Al 2 O 3 as the adjustment materials. The influence of the reconstructed steel slag composition and structure on the iron reduction rate and vanadium migration was investigated. Additionally, we tested the compressive strength of the cement slurry at different times to compare the gelling performance of the tailings after iron reduction from the Vanadium-containing steel slag.The results showed that the high-temperature reduction method effectively reduced metallic iron and vanadium in the steel slag. The iron reduction rate reached as high as 98.53%, and inert components such as the CaO-FeO-MgO-MnO solid solution (RO) phase, C 2 F, and Fe 3 O 4 in the original steel slag could be effectively reconstructed to form a glass-phase structure with certain gelling properties. Moreover, the content of the glass phase remained stable above 90%. For the same temperature, the liquid viscosity of the reconstructed steel slag increased, and after cooling, the glass-phase content decreased with decreasing Si/Al ratio. This resulted in an increase in the amount of crystalline-phase minerals such as Ca 3 Mg(SiO 4 ) 2 , Ca 2 Al 2 SiO 7 , and C 2 S. The iron reduction rate generally exhibited a downward trend, and the change in the vanadium content was consistent with the iron reduction rate. Following the reduction and reconstruction of iron separation, the gelling properties of the vanadium-containing steel slag improved, with a 28-day strength that was 64.26% higher than that of the original steel slag.

Mineralogical study on steel slags oriented to vanadium and titanium recovery

Recovery of valuable metals from electroplating sludge with reducing additives via vitrification

A Novel Process for Simultaneous Extraction of Iron, Vanadium, Manganese, Chromium, and Titanium from Vanadium Slag by Molten Salt Electrolysis

Reduction and reconstruction of vanadium-containing steel slag at high temperature

Vanadium extraction from steel slag: Generation, recycling and management

Efficient Separation and Recovery of Vanadium, Titanium, Iron, Magnesium, and Synthesizing Anhydrite from Steel Slag

Recovery of Valuable Elements from Molten Vanadium Slag Through High-Temperature Reduction

Experimental Study on the Formation of V-Rich Spinel Phase in CaO-SiO2-MgO-FeOt-Al2O3-V2O3-P2O5 Slags at 1573 K (1300 °C)

Titanium-Enriched Slag Prepared by Atmospheric Hydrochloric Acid Leaching of Mechanically Activated Vanadium Titanomagnetite Concentrates

Extraction of vanadium and enrichment of titanium from modified Ti-bearing blast furnace slag

Utilization of Vanadium Extraction from Vanadium-bearing Steel Slag

Enrichment and reconfiguration of titanium-bearing phase in vortex smelting reduction process of vanadium–titanium magnetite

Technological Study of Titanium Slag Production from Titanium-Bearing Blast Furnace Slag

CYTOGENETICS OF B-CELL LINEAGE ACUTE LYMPHOCYTIC LEUKAEMIAS OF CHILDHOOD

Resistance exercise improves autonomic regulation at rest and haemodynamic response to exercise in non-alcoholic fatty liver disease.

Investigation on Vanadium Chemistry in Basic-Oxygen-Furnace (BOF) Slags—A First Approach

I've been worrying so much lately that I sometimes have trouble sleeping at night. Could I have an anxiety disorder?

Review of leaching, separation and recovery of vanadium from roasted products of vanadium slag

Co-recovery of iron, chromium, and vanadium from vanadium tailings by semi-molten reduction–magnetic separation process

Innovative strategy for comprehensive utilization of vanadium slag: Maximizing valuable metals recovery and minimizing hazardous waste generation