Abstract:White organic light-emitting diodes (OLEDs) have been attracted much attention due to the potential applications in illumination light source and back light for liquid crystal display (LCD) as well as full color displays. A general solution to realizing white color OLEDs is to use separate multiple emitter-layers to produce different colors. The white light is achieved based to the color mixing. Unfortunately,the electroluminescent (EL) performances of this kind of devices such as color stability and efficiency still need improved. An optical microcavity has a structure with at least one space dimension on the order of optical wavelength. In a microcavity device,only one or a few optical modes are able to interact with the materials inside. Thus,the interaction between material and light within microcavity is greatly changed comparing with the condition of free space. To obtain white light in MOLED,a multimode within the emission spectrum of the wide-band emitter is essential,and can be realized by charging cavity length. However,for the white MOLED with multiple layer structure,the EL performances were seldom reported. We report the realization of a bright white MOLED with a simple two-layer structure and only one emitter layer.An microcavity organic light-emitting diode (MOLED) was developed to emit white light. The MOLED was designed and fabricated with a simple structure of glass/DBR/ITO(194 nm)/NPB(93 nm)/Alq3(49 nm)/MgAg(150 nm). White light was observed based to the emission of two cavity modes despite only one emitter layer. By well adjusting the resonance wavelength (488 and 612 nm) and intensity,the two cavity modes give rise to a bright,white electroluminescene emission with a maximum luminance of 16 435 cd/m2,maximum luminous efficiency of 11.1 cd/A. At the typical luminance of 100 cd/m2,the luminous efficiency,voltage and current density are 9 cd/A,6 V and 1.2 mA/cm2 for the MOLED device,respectively. The MOLED has a CIE chromaticity coordinate of (0.32,0.34),which is very stable under different applied voltage. The result indicated that microcavity is an efficient structure to construct white OLED.

A Kind of White OLED Based Using Double Doping Emitting Layer for LCD Backlighting

Studies on White OLED with Multi Luminescence Layer

Double-layer Printed White Organic Light-Emitting Diodes Based on Multicomponent High-Performance Illuminants

High-Efficient and Brightness White Organic Light-Emitting Diodes Operated at Low Bias Voltage

Characteristics of a Double Layers White Organic Electroluminescent Device Using TBPe As Dopant in a Blue Mixed Layer

Properties of White Organic Electroluminescent Device with Double Light-Emitting Layers Based Upon Different Hosts

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

A Kind of Novel White Organic Electroluminescence Device Based on Zn（BTZ）;∶Rubrene Emitting Layer for LCD Backlighting

High Performance Non-Doped Blue-Hazard-free Hybrid White Organic Light-Emitting Diodes with Stable High Color Rendering Index and Low Efficiency Roll-off

White Organic Light-Emitting Devices with A Phosphorescent Multiple Emissive Layer

White Organic Light-Emitting Devices Using 2,5,2('),5(')-Tetrakis(4(')-Biphenylenevinyl)-Biphenyl As Blue Light-Emitting Layer

White Organic Light-Emitting Devices with High Color Purity and Stability

High-performance red and white organic light-emitting diodes based on a novel red thermally activated delayed fluorescence emitter in an exciplex matrix

Progress of White Organic Light-Emitting Device

Design and Fabrication of Organic Light-emitting White-color Microcavity Device

Efficient white organic light-emitting diodes with double co-host emitting layers

White Organic Light-Emitting Diodes with External Quantum Efficiency of 20.77% at 10000 cd m-2 and Ultra-High Color Stability by Controlling Exciton Distribution

Balanced Full-Color White Organic Light-Emitting Devices with Simple Double-Emissive-Layer Structure

Low Doping White Phosphorescent Organic Light-Emitting Diodes

Efficient white organic light-emitting devices using a thin 4,4′-bis(2,2′-diphenylvinyl)-1,1′-diphenyl layer

Enhancing color purity and efficiency of white organic light-emitting diodes using a double-emitting layer