Abstract:Bis-2-(2-hydmxyphenyl) benzothiazolate) zinc (Zn(BTZ)2) is one of the best white electroluminescent materials used in organic light-emitting diodes (OLEDs). White light, which is composed of three discrete peaks in R/G/B regions, is very important and particularly useful for full-color display. However, most of white OLEDs, so far, are fabricated with multilayer structures, which results in the complication of fabrication process and decline of quantum efficiency. So these devices are not suitable for the purpose of large-scale industrial manufacture. In this paper, firstly, Zn(BTZ )2 had been synthesized from the complex reaction between zinc acetate dihydrate and 2-(2-hydmxyphenyl) benzothiazolate. Then we used Zn(BTZ)2 as main light-emitting material and fabricated two types of organic white-light-emitting devices. The configurations of the devices are as follows: ITO/PVK: TPD/Zn(BTZ)2/Al and ITO/PVK: TPD/Zn(BTZ)2: Rubrene/Al. The bright and steady light emitting had been obtained, and the brightness of the devices came to 3200cd/m^2 and 2900cd/m^2 lat a driving voltage of 16V), respectively. We also measured the CIE coordinates of the above devices, they were (x=0.242, y=0.359) and (x=0.324, y=0.343), respectively. The latter CIE coordinate is very close to the equi-energy point (x=0.33, y=0.33), and the corresponding quantum efficiency value is 0.47%. This value is higher than the former one, which is 0.32%. Details on the white-light-emitting characteristics of the devices were explained by the curves of current density-voltage, optical current-voltage and quantum efficiency-current density, they were measured using a quantum efficiency measure system including the Keithley 485 Picoammeter and 2400 SourceMeter. We also discussed the emitting mechanisms of the material and the devices at last.

A Kind of Novel White Organic Electroluminescence Device Based on Zn（BTZ）;∶Rubrene Emitting Layer for LCD Backlighting

A Kind of White OLED Based Using Double Doping Emitting Layer for LCD Backlighting

Synthesis of Zn(BTZ)2 and Fabrication of White Organic Light-emitting Devices

Luminescent Properties of White Organic Light-Emitting Devices Based on Rubrene Ultrathin Layer

White Organic Light-Emitting Devices Using Zn(BTZ)2 Doped with Rubrene As Emitting Layer

White Organic Light-Emitting Diodes Based on Doped and Ultrathin Rubrene Layer

A novel white OLED with a doping of Rubrene into ZnL

A White OLED with Liq∶Rubrene As Emitting Layer

A White Organic Light Emitting Diode Based on Anthracene-Triphenylamine Derivatives

Fabrication of a White Organic Light-Emitting Device with Single Liq:Rubrence Luminescent Layer

White Organic Light-Emitting Devices Based on 2-(2-hydroxyphenyl) Benzothiazole and Its Chelate Metal Complex

White Organic Light-Emitting Devices Based on BFHQZn As Emitter

High-efficiency Simple Structure White Organic Light-emitting Devices Based on Rubrene Ultrathin Layer

Efficient Fluorescent White Organic Light-Emitting Devices Based on a Ultrathin 5,6,11,12-Tetraphenylnaphthacene Layer

Studies on White OLED with Multi Luminescence Layer

Double-layer Printed White Organic Light-Emitting Diodes Based on Multicomponent High-Performance Illuminants

Properties of White Organic Electroluminescent Device with Double Light-Emitting Layers Based Upon Different Hosts

White Organic Light-Emitting Devices Using 2,5,2('),5(')-Tetrakis(4(')-Biphenylenevinyl)-Biphenyl As Blue Light-Emitting Layer

A White OLED with 9,9'-Bianthracene : Rubrene As the Emitting Layer

Efficient bright white organic light-emitting diode based on non-doped ultrathin 5,6,11,12-tetraphenylnaphthacene layer

White Organic Light-Emitting Diodes Using Phosphorescent and Fluorescence As Light Emit Ting Materials