Abstract:A white organic light-emitting device (WOLED) with dual-emitting layers was presented, in which the blue fluorescent dye 2,5,8,11-terta-tertbutylperylene (TBPe) was doped in 2-methyl-9, 10-di(2-naphthyl)-anthracene (MADN) as a blue-emitting layer, while 5,6,11,12-tetraphenylnaphthacene (rubrene, Rb) was doped in the above-mentioned materials as a yellow-emitting layer. The fabricated monochromatic devices using the blue-and yellow-emitting layer have demonstrated that the direct charge trapping mechanism is the dominant emission mechanism in the yellow OLED. Studies on the WOLEDs with dual-emitting layers have shown that the performances of these devices are strongly susceptible to the thickness of the emitting layer and the stack order of two emitting layers. Structure of ITO(160 nm)/NPB(30 nm)/MADN: 5 wt% TBPe: 3 wt% Rb(10 nm)/MADN: 5 wt% TBPe(20 nm)/BCP (10 nm)/Alq3(20 nm)/Al(100 nm) was determined to be the most favorable WOLED. The maximum luminance of 16 000 cd cm(-2) at the applied voltage of 13.4 V and Commission International de 1'Eclairage (CIE) coordinates of (0.3263, 0.3437) which is closer to the standard white light (CIE (0.33, 0.33)) than the most recent reported WOLEDs were obtained. Moreover, there is just slight variation of CIE coordinates (Delta CIEx,y = 0.0171, 0.0167; corresponding Delta u'v' = 0.0119) when the current density increases from 10 to 100 mA cm(-2). It reveals that the emissive dopant Rb acts as charge traps to improve electron-hole balance, provides sites for electron-hole recombination and thus makes carriers distribute more evenly in the dual-emitting layers which broaden the recombination zone and improve the stability of the CIE coordinates.

White Organic Light-Emitting Devices with A Phosphorescent Multiple Emissive Layer

Efficient Non-Doped Monochrome and White Phosphorescent Organic Light-Emitting Diodes Based on Ultrathin Emissive Layers

White Organic Light-Emitting Devices Using 2,5,2('),5(')-Tetrakis(4(')-Biphenylenevinyl)-Biphenyl As Blue Light-Emitting Layer

Low Driving Voltage Blue, Green, Yellow, Red and White Organic Light-Emitting Diodes with a Simply Double Light-Emitting Structure

High-efficiency Blue and White Organic Light-Emitting Devices by Combining Fluorescent and Phosphorescent Blue Emitters

Bright White Organic Light-Emitting Diode Mixed Blue and Green Emission

White Organic Light-Emitting Devices with High Color Purity and Stability

White Organic Light Emitting Devices with Hybrid Emissive Layers Combining Phosphorescence and Fluorescence

Efficient White Organic Light-Emitting Devices Based on Blue, Orange, Red Phosphorescent Dyes

Highly efficient white organic light-emitting devices based on a multiple-emissive-layer structure

Steady full colour white organic light-emitting devices consisting of an ultrathin red fluorescent layer

Improved Efficiency For White Organic Light-Emitting Devices Based On Phosphor Sensitized Fluorescence

White Organic Light-emitting Diodes with High Color Rendering Index Using Phosphorescent Sensitizer and Blue Fluorescent Emitter

White Organic Light-Emitting Device with Both Phosphorescent and Fluorescent Emissive Layers

Efficient White Phosphorescent Organic Light-Emitting Diodes Consisting of Orange Ultrathin and Blue Mixed Host Emission Layers

Ultrathin nondoped emissive layers for efficient and simple monochrome and white organic light-emitting diodes.

Efficient white organic light-emitting devices using a thin 4,4′-bis(2,2′-diphenylvinyl)-1,1′-diphenyl layer

High Colour Rendering Index White Organic Light-Emitting Devices with Three Emitting Layers

Highly Efficient and High Colour Rendering Index White Organic Light-Emitting Devices Using Bis(2-(2-fluorphenyl)- 1,3-Benzothiozolato-n,c2′) Iridium (acetylacetonate) As Yellow Emitter

White Organic Light-Emitting Diodes Using Phosphorescent and Fluorescence As Light Emit Ting Materials

Doping-free Hybrid White Organic Light-Emitting Diodes with Fluorescent Blue, Phosphorescent Green and Red Emission Layers