Abstract:Carbon nanotube film (CNTF) interlayer toughened carbon fiber (CF) reinforced epoxy resin (EP) hybrid composites were fabricated via resin transfer molding (RTM) processing in this paper. Multi-walled carbon nanotubes were prepared by chemical vapour deposition, and carbon nanobute films were prepared through vacuum filtration. Model I interlaminar fracture toughness G(IC) of laminates and model II interlaminar fracture toughness G(IIC) of laminates are used to characterize the fracture toughness. of the RTM laminates. Furthermore, the toughening mechanism is discussed through microstructure of the fracture surface combining mechanical properties. The compact degree of the carbon nanotube films was influenced by the ratio of the multi-walled carbon nanotubes, which led to different impregnation of the carbon nanobute films to the epoxy resin. Experimental results indicated that the carbon nanotube films from carbon nanotubes of large aspect ratios exhibited better impregnation effect than those films from carbon nanotubes of small aspect ratios. The carbon nanotube films intercalated in the interlayer of the composites between the carbon fiber and the matrix resin as a whole laminated structure, and they still kept a continuous grid structure in the CNTF/CF/EP hybrid composites. As to the model I interlaminar fracture toughness G(IC) of laminates,the carbon nanotube films have no obvious improvement on the G(IC) value. However, the carbon nanotube films laid between the carbon fiber layers changed the failure mode of the CF/EP composites, leading to increased initial failure load and breaking load. As to model II interlaminar fracture toughness G(IIC) of laminates, experimental results exhibited that the reinforcing efficacy on the sliding mode shear failure was remarkably increased for the CNTF/CF/EP hybrid composites. Model II interlaminar fracture toughness G(IIC) of laminates has increased from 1292 J/m(2) of the CF/EP to 2869 J/m(2) of the CNTF/CF/EP hybrid composites. There is 120% amplification in G(IIC) testing value. Microstructures of the CF/EP composites and the CNTF/CF/EP hybrid composites were characterized through scanning electron microscope (SEM) for understanding the prominent improvement on the toughening properties. SEM pictures showed that there was strong shear history of the carbon nanotube films via the sliding mode failure. The carbon nanotubes absorbed a great deal of energy through shear sliding and hindered crack growth,leading to increase of the G(IIC) value outstandingly.

Response of Mode Ii Interlaminar Fracture Toughness of Composite Laminates with Carbon Nanotubes Interlayer

Cellulose Nanocrystal-Polyetherimide Hybrid Nanofibrous Interleaves for Enhanced Interlaminar Fracture Toughness of Carbon Fibre/epoxy Composites

Loading Rate Dependence of Mode II Fracture Toughness in Laminated Composites Reinforced by Carbon Nanotube Films

Improvement of Interlaminar Fracture Toughness in Carbon Fiber/epoxy Composites with Carbon Nanotubes/polysulfone Interleaves

CARBON NANOTUBE FILM INTERLAYER TOUGHENED CARBON FIBER REINFORCED EPOXY RESIN HYBRID COMPOSITES

Effects of Loading Rates on Mode I Interlaminar Fracture Toughness of Carbon/epoxy Composite Toughened by Carbon Nanotube Films

Understanding interlaminar toughening of unidirectional CFRP laminates with carbon nanotube veils

Enhancing interlaminar fracture toughness of CFRP laminates with hybrid carbon nanotube/graphene oxide fillers

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

Effect Of Functionalization And Adding Method Of Carbon Nanotube On Interlaminar Property Of Carbon Fiber/Epoxy Composite

Enhancing The Interlaminar Fracture Resistance Of Laminated Composites By Using Continuous Carbon Nanotube Films

Interlaminar Toughening of Unidirectional CFRP with Multilayers Graphene and MWCNTs for Mode Ⅱ Fracture

On the Mix-Mode Fracture of Carbon Fibre/epoxy Composites Interleaved with Various Thermoplastic Veils

Free-Standing CNT Film for Interlaminar Toughening: Insight into Infiltration and Thickness Effects

Mode-II Fracture Toughness of Carbon Fiber Reinforced Polymer Composites Interleaved with Polyethersulfone (PES)/Carbon Nanotubes (CNTs)

Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture

Interlaminar toughening in carbon fiber/epoxy composites interleaved with CNT-decorated polycaprolactone nanofibers

Synergistic Improvement of Electrical Conductivity and Interlaminar Toughness of Carbon Fiber Resin Matrix Composites Based on Intercalation Method

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Improved Mode Ⅰ Interlaminar Fracture Toughness of Random Polypropylene Composite Laminate Via Multiscale Reinforcing Formed by Introducing Functional Nanofibrillated Cellulose

Interlaminar properties of carbon nanotubes modified carbon fibre fabric reinforced polyimide composites