Abstract:Carbon nanotube film (CNTF) interlayer toughened carbon fiber (CF) reinforced epoxy resin (EP) hybrid composites were fabricated via resin transfer molding (RTM) processing in this paper. Multi-walled carbon nanotubes were prepared by chemical vapour deposition, and carbon nanobute films were prepared through vacuum filtration. Model I interlaminar fracture toughness G(IC) of laminates and model II interlaminar fracture toughness G(IIC) of laminates are used to characterize the fracture toughness. of the RTM laminates. Furthermore, the toughening mechanism is discussed through microstructure of the fracture surface combining mechanical properties. The compact degree of the carbon nanotube films was influenced by the ratio of the multi-walled carbon nanotubes, which led to different impregnation of the carbon nanobute films to the epoxy resin. Experimental results indicated that the carbon nanotube films from carbon nanotubes of large aspect ratios exhibited better impregnation effect than those films from carbon nanotubes of small aspect ratios. The carbon nanotube films intercalated in the interlayer of the composites between the carbon fiber and the matrix resin as a whole laminated structure, and they still kept a continuous grid structure in the CNTF/CF/EP hybrid composites. As to the model I interlaminar fracture toughness G(IC) of laminates,the carbon nanotube films have no obvious improvement on the G(IC) value. However, the carbon nanotube films laid between the carbon fiber layers changed the failure mode of the CF/EP composites, leading to increased initial failure load and breaking load. As to model II interlaminar fracture toughness G(IIC) of laminates, experimental results exhibited that the reinforcing efficacy on the sliding mode shear failure was remarkably increased for the CNTF/CF/EP hybrid composites. Model II interlaminar fracture toughness G(IIC) of laminates has increased from 1292 J/m(2) of the CF/EP to 2869 J/m(2) of the CNTF/CF/EP hybrid composites. There is 120% amplification in G(IIC) testing value. Microstructures of the CF/EP composites and the CNTF/CF/EP hybrid composites were characterized through scanning electron microscope (SEM) for understanding the prominent improvement on the toughening properties. SEM pictures showed that there was strong shear history of the carbon nanotube films via the sliding mode failure. The carbon nanotubes absorbed a great deal of energy through shear sliding and hindered crack growth,leading to increase of the G(IIC) value outstandingly.

Loading Rate Dependence of Mode II Fracture Toughness in Laminated Composites Reinforced by Carbon Nanotube Films

Effects of Loading Rates on Mode I Interlaminar Fracture Toughness of Carbon/epoxy Composite Toughened by Carbon Nanotube Films

Loading Rate Dependency of Mode I Interlaminar Fracture Toughness for Unidirectional Composite Laminates

Response of Mode Ii Interlaminar Fracture Toughness of Composite Laminates with Carbon Nanotubes Interlayer

The effect of loading rate on the mode I interlaminar fracture toughness

Study on Mechanical Properties of Carbon Nanotube Reinforced Composites

The Loading-Rate Dependent Tensile Behavior of CNT Film and Its Bismaleimide Composite Film

Frictional Sliding of Microcracks under Compression

CARBON NANOTUBE FILM INTERLAYER TOUGHENED CARBON FIBER REINFORCED EPOXY RESIN HYBRID COMPOSITES

Interlaminar Fracture Toughness and Impact Resistance of Carbon Fiber Reinforced Composite with Magnetic Aligned CNTs

Evaluation of Mode II Fracture Toughness under High Loading Rate Conditions for Composite Bonded Joints

Mode-II Fracture Toughness of Carbon Fiber Reinforced Polymer Composites Interleaved with Polyethersulfone (PES)/Carbon Nanotubes (CNTs)

Strengthening and Failure Mechanisms of Individual Carbon Nanotube Fibers under Dynamic Tensile Loading

Fracture Toughness for Longitudinal Compression Failure of Laminated Composites at High Loading Rate

Understanding interlaminar toughening of unidirectional CFRP laminates with carbon nanotube veils

Fracture Toughness of Carbon Nanotube-Reinforced Metal- and Ceramic-Matrix Composites

Mode Ι Fracture Toughness of Adhesively Bonded Composite Joints under High Loading Rate Conditions

Failure Analysis and the Optimal Toughness Design of Carbon Nanotube-Reinforced Composites

Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture

On the effect of long carbon nanotubes on mode i delamination toughness of laminated composites

Free-Standing CNT Film for Interlaminar Toughening: Insight into Infiltration and Thickness Effects