Abstract:The mechanical response of UACS laminates under compressive and progressive crushing load was numerically analyzed. The compressive damage propagation of UACS laminates with different slit patterns in 0° layer was demonstrated. The effect of different slit patterns on inhibiting delamination propagation and increasing energy absorption of UACS laminates under progressive crushing load was numerically analyzed. The outstanding mechanical performance and flowability of unidirectionally arrayed chopped strands laminates (UACS) give them an advantage in the manufacture of engineering structures with complex geometries. In this research, the mechanical response of UACS laminates with bi‐angled slits and staggered slits under quasi‐static compression and progressive crushing loads is numerically analyzed for the first time. The aim is to clarify the damage mechanism of UACS laminates under compressive and crushing load. Simulation results reveal that the compressive strength of [90/0]4s UACS laminates with bi‐angled slits is 635.9 MPa, with an error of 4.2% compared to experimental data. For the stacking sequence of [0/90]4s, the strength is measured as 581.96 MPa with a 5% error. Proposed finite element model could accurately describe the mechanical properties of UACS laminates. Additionally, the progressive crushing response is in good agreement with the experimental data, the error in energy absorption for [90/0]4s UACS laminates with bi‐angled slits is noted at 7% compared to experimental values. It has been demonstrated that bi‐angled slits significantly contribute in restraining the propagation of delamination and improving the amount of energy absorption of UACS laminates. Highlights The mechanical response of UACS laminates under compressive and progressive crushing load was numerically analyzed. The compressive damage propagation of UACS laminates with different slit patterns in 0° layer was demonstrated. The effect of different slit patterns on inhibiting delamination propagation and increasing energy absorption of UACS laminates under progressive crushing load was numerically analyzed.

EXPERIMENTAL AND NUMERICAL STUDY ON INTERLEAVED LAMINATES UNDER QUASI-STATIC FORCE

Applicability Evaluation of Damage Evolution Models in Simulating Repeated Low-Velocity Impact Behavior of Composite Laminates

Post-Buckling Response of Carbon/Epoxy Laminates with Delamination under Quasi-Static Compression: Experiments and Numerical Simulations

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

XFEM Simulation of Delamination in Composite Laminates

XFEM Simulation of Delamination in Composite Laminates Part A Applied Science and Manufacturing

Failures of laminates under nonpenetrative impacts

Application of a delamination model to laminated composite structures

Effect of gap and overlap fiber placement defects on the delamination behavior of L-shaped composite laminates

The effect of delamination on damage behavior of composite laminates subjected to three-point bending

Damage propagation and strength prediction of a single-lap interference-fit laminate structure

Finite element analysis on the compression and crush responses of laminates with unidirectionally arrayed chopped strand in 0° plies

Delamination prediction in composite laminates under low-velocity impact

Numerical Prediction of Compressive Residual Strengths of a Quasi-Isotropic Laminate with Low-Velocity Impact Delamination

Numerical investigation of the low-velocity impact damage resistance and tolerance of composite laminates with preloads

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

A novel strategical approach to mitigate low velocity impact damage in composite laminates

Experimental and numerical studies on low-velocity impact of laminated C/SiC structures

Simulation and analysis of delamination damage propagation in CFRP structures