Abstract:The cellular automaton-lattice Boltzmann method-immersed moving boundary coupled model is established to study the microstructure evolution during the solidification process of 2009Al/SiCp. After several model benchmarks, the natural convection of liquid phase and its effect on particle settlement under different pulling velocities were studied firstly. The results showed that at higher pulling velocity, the particle decelerates downward before contacting with dendrite front due to intensified natural convection. At lower pulling velocity, the particle decelerates gradually until a change in direction and upward movement. As the particle approach the tip of the dendrite, the particle experiences a brief upward movement before contacting the dendritic front. Then the convection induced by particles has an impact on the distribution of solutes in the liquid phase. It has been observed that at lower pulling velocity, there is a significant difference in solute distribution at the solidification front. The primary reason for this phenomenon is the higher solute concentration near the solidification front at lower pulling velocity, rather than the higher liquid phase flowing rate. Finally, our model investigated the microstructure evolution process during the directional solidification process of 2009Al/SiCp at different pulling velocities. The results indicate a good agreement between the simulation results and experiment observations.

Numerical Simulation of Effect of Pulling Velocity on Structure Evolution During Directional Solidification of Ti-45Al Alloy

Numerical Simulation of Microstructure Evolution During Directional Solidification of Ti-45at. % Al Alloy

Numerical Simulation of Effect of Thermal Gradient on Structure Evolution During Directional Solidification of Ti-Al Alloy

Simulation of Microstructural Evolution in Directional Solidification of Ti-45at.% Al Alloy Using Cellular Automaton Method

Numerical simulation of cellular/dendrite transition and its growth during directional solidification of Ti44Al alloy

Numerical Simulaton of Cellular/dendritic Transition and Its Growth During Unidirectional Solidificationin of Ti–Al Alloy

Modeling of Cell/Dendrite Transition During Directional Solidification of Ti-Al Alloy Using Cellular Automaton Method

Numerical Simulation of Directional Solidification Microstructure of Ti-45Al Alloy Based on CA Method

Microstructure Evolution During Directional Solidification of 2009al/sicp at Different Pulling Velocities: Modeling and Experiment

Numerical Simulation of Microstructure in Aluminum Alloy Directional Solidification Based on Cellular Automaton Method

Phase-field Simulation of Structure Evolution at High Growth Velocities During Directional Solidification of Ti55Al45 Alloy

The Effect of the Shear Flow on Directional Solidification of Scn-3wt% Salol Alloy

Effects of Withdrawing Rate on Directional Solidification Structure of Ti-47Al-3Nb-0.3Si Alloy

MICROSTRUCTURE EVOLUTION OF Ti44Al6Nb ALLOY DIRECTIONALLY SOLIDIFIED WITH COLD CRUCIBLE

Influence of Different Growth Velocities on Directional Solidification Microstructure of Ti-45%Al Peritectic Alloy

Phase-Field Modeling of Solute Trapping in Single-Phase Alloys During Directional Solidification

Numerical Simulation of Dendritic Growth During Directional Solidification Considering Peritectic Phase

Phase-field Simulation of Formation of Cellular Dendrites and Fine Cellular Structures at High Growth Velocities During Directional Solidification of Ti56Al44 Alloy

Numerical Simulation of Columnar to Equiaxed Transition for Directionally Solidified Ti-44Al Alloy

Numerical Simulation on Near-Rapid Directional Solidification Processof Al Bar Sample

The Numerical Simulation of Effects of Alloying Elements on 20CrMnTi Solidified Structure