Abstract:The thermal protection layer of the solid rocket motor (SRM) is an important elastic material applied to the adhesive shell and propellant; the thickness of the layer is related to the performance of the SRM. This paper proposes a method of linear laser scanning to realise the precise thickness measurement of the thermal protection layer. The custom-designed data acquisition device separately collects distance values from the inner surface of the thermal protection layer, before and after coating, using a linear laser sensor. The two measured distance values are subtracted and D-H modelling (a classical kinematics modelling method proposed by Denavit and Hartenberg) is conducted, then the system errors are analysed and calibrated to obtain the 3D point cloud data of the profile. The iterative closest point (ICP) algorithm is used to register the point cloud data relating to the internal surface, then an octree-based simplification method is proposed to realise the denoising and simplification of the point cloud data. Next, the normal vector of the point cloud data is calculated and the reference surface is extracted as the projection plane. The simplified point cloud is then projected onto the plane and the geometric information of the point cloud data after projection is extracted. A series of distance differences, namely the thickness of the thermal protection layer, is obtained. Finally, the Poisson surface reconstruction algorithm is used to display the inner surface of the thermal protection layer. The results show that the difference between the calculated values and the measured values is less than 0.1 mm, indicating that the thickness of the thermal protection layer of the SRM can be measured by the proposed non-contact method.

Application of laser tracker to thrust line measurement of solid rocket motor

Measuring Straightness Method with Common Path Compensation for Laser Drift

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

A Novel Laser Tracking Testbed For Robot Trajectory Errors

Application of Optimal Fitting in the Static Thrust Line Measurement of Solid Rocket Motor

Airborne Laser Communication System with Automated Tracking

Unconstrained measurement method and verification of thrust vector in small solid propulsion system

Research on Flexible Centroid Measurement Method for Segments of Large-Thrust Carrier Rocket

Thickness measurement method for the thermal protection layer of a solid rocket motor based on a laser point cloud

High-velocity measurement method in dual-frequency laser interference tracker based on beam expander and acousto-optic modulator

Indirect Measurement of Machine Tool Motion Axis Error with Single Laser Tracker

Motorized Measurement of Deformation on Surface of Revolution With 2-D Laser Profiler

Development of Active Laser Reflector for Alignment and Monitoring of Large-Scale Scientific Devices

Solid rocket motor design employing an efficient performance matching approach

Magnetically Suspended Rocket Motor Thrust Test Stand

Laser tracker error determination using a network measurement

Numerical Simulation of Thrust Line Off-set of Solid Rocket Motor Based on Monte-Carlo Method

Multi-position control of movements of large-sized structural elements during static loading using a laser tracker

Laser tracking system and its application in the development of spacecraft

Experimental Study of a Low-Thrust Measurement System for Thruster Ground Tests

Laser Tracker-Based on-the-Fly Machine Tool Calibration without Real-Time Synchronization