Abstract:Substrate integrated waveguide (SIW) technology has immense applications for the design of microwave components and devices. In this paper, a low loss substrate integrated waveguide (SIW) structure is designed, fabricated and experimentally tested to exploit in S band and C band applications. SIW structures are constructed by interconnecting parallel metallic surfaces with two rows of metallic vias embedded in a dielectric material. In comparison with rectangular waveguides, SIW inherits better wave guiding characteristics. Substrate integrated waveguides feature a lightweight, minimal-loss, versatile, and cost-effective approach for circuit component integration over the same substrate. The presented SIW structure is designed using RT/Duroid 5880 material, which has dielectric constant, εr = 2.2, dissipation factor, tan δ = 4 × 10−4 and height h = 0.508 mm. The insertion and return losses measured using vector network analyzer are 0.95 dB and 23 dB, respectively. Simulated and measured results are in close agreement with each other with slight variation. The insertion loss (S21) and return loss (S11) have uncertainty values of 0.51 dB and 2 dB, respectively. Suggestions for future research are also presented with an emphasis on the use of advanced materials in SIW systems for high-frequency applications with limited losses.

Investigation on tolerances of substrate integrated waveguide (SIW)

A New Type of Periodically Loaded Half-Mode Substrate Integrated Waveguide and Its Applications

The Design Of T-Septum Substrate Integrated Waveguide With An Ultra-Wideband Monomode

Broadband Filter Based on Stub-Loaded Ridge Substrate Integrated Waveguide (SIW) in Low Temperature Cofired Ceramic (LTCC)

Parameter Characterization Of Silicon-Based Patterned Shield And Patterned Ground Shield Coplanar Waveguides

Guided-wave and leakage characteristics of substrate integrated waveguide

Power Handling Capability Of Substrate Integrated Waveguide Interconnects And Related Transmission Line Systems

Analysis of Substrate Integrated Waveguide Structures Using Contour Integral Equation

Electrical-Thermal Characterizations of SIW with Numerical SOC Technique

Improvement of Manufacturing Process for Multilayer Substrate Integrated Waveguide Cavity

Substrate Integrated Waveguide Equalizers and Attenuators with Surface Resistance

Studies on Average Power Handling Capacity of SIW with Heat Transfer Theory

Waveguide Dispersion Tailoring by Using Embedded Impedance Surfaces

Investigations on half-mode substrate integrated waveguide for high-speed interconnect application

Broadband Printed-Circuit-Board Characterization Using Multimode Substrate-Integrated- Waveguide Resonator

LTCC-Based Substrate Integrated Image Guide and Its Transition to Conductor-Backed Coplanar Waveguide

Characterization of SU-8 Material Based on Substrate Integrated Waveguide Cavities

Investigations Onhalf-Mode Substrate Integrated Waveguide Forhigh-Speed Interconnect Application

Design and Construction of a Low Loss Substrate Integrated Waveguide (SIW) for S Band and C Band Applications

SIW-Like Guided Wave Structures and Applications

Low loss and broadband transition between substrate integrated waveguide and rectangular waveguide