Abstract:Squeeze casting process can effectively resolve the casting difficulties for wrought aluminum alloys by pressurized solidification. The effects of applied pressure (0.1-125 MPa) on the microstructure refinement, non-equilibrium eutectic phase aggregation and fracture behavior of Al-Zn-Mg-Cu alloys prepared by squeeze casting were investigated through metallography, scanning electron microscopy and energy dispersive spectroscopy. The results showed that the primary α-Al grains transformed from coarse dendrites to refined equiaxed grains with increasing pressure. Considerable primary refinement was achieved at 100 MPa, with a significant decrease by 63% in the average grain size from 273 μm to 101 μm; the non-equilibrium eutectic phases were homogenized and refined, and almost dissolved into the Al matrix after T6 heat treatment. The mechanism of solidification behaviors in pressurized solidification was elucidated. Firstly, the applied pressure increased the thermodynamic driving force to promote primary grain nucleation. Secondly, the solute diffusion and constitutional undercooling at the front of the solid/liquid interface front were inhibited by pressure, and grain growth in a dendritic structure was thus restrained. Thirdly, interdependence theory and thermodynamic calculations were conducted to quantitatively describe the primary grain size changes under pressurized solidification. Lastly, the ternary eutectic reaction L → α-Al + T-Mg (Al, Zn, Cu) 2 + Al 2 Cu and binary eutectic reaction L→ α-Al + Al 7 Cu 2 Fe were suppressed by the reduced solute segregation. Furthermore, when the pressure increased from 0.1 MPa to 125 MPa, the ultimate tensile strength was raised from 428 MPa to 538 MPa, almost approaching that of samples by forging process. The refined eutectic phases decreased stress concentration and improved fracture behaviors.

Production of Thin-walled Aluminum Alloy Shell by Squeezing Casting

Effect of Pressure on Microstructures and Mechanical Properties of Al-Cu-based Alloy Prepared by Squeeze Casting

Experimental study of squeeze casting of ZK60 magnesium alloy

Effect of Process Parameters on the Mechanical Properties and Microstructure of Large-Sized Aluminum Alloy Parts with Complex Shape Formed by Squeeze Casting

Effects of Processing Parameters on Squeezing Casting ADC12 Aluminum Alloy Connecting Rod's Cap

Effect of pressure on the microstructure refinement, solidification mechanism and fracture behavior of wrought Al-Zn-Mg-Cu alloys prepared by squeeze casting

Effect of Cooling Rate on Microstructure and Mechanical Properties of Squeeze Cast Al–Cu–Mg Alloy

Numerical Simulation of Squeeze Casting of Aluminum Alloy Flywheel Housing with Large Wall Thickness Difference and Complex Shape

Microstructure and Mechanical Properties of Al–6Zn–2.5Mg–1.8Cu Alloy Prepared by Squeeze Casting and Solid Hot Extrusion

Effects of Squeeze Casting on Microstructure and Solute Distribution in Al-Cu Alloy

The Effects of Squeeze Casting on the Mechanical Properties and Microstructures of ZL201

Ultrasonic Assisted Squeeze Casting of a Wrought Aluminum Alloy

AN ELASTIC-VISCOPLASTIC CONSTITUTIVE MODEL FOR SQUEEZE CASTING ALUMINUM ALLOY

Study on Microstructure Distribution of Al-Cu-Mg Alloy in Squeeze Casting Process

Effect of squeeze pressure on the microstructure and mechanical property of Al-4Cu-1Mg alloy

Mechanical Properties of Aluminum Alloy at Elevated Temperature in Squeezing Casting

Squeezing Casting AC4CH Alloy

Microstructure and Property of High Strength-ductility Al-5.0Cu-0.4Mn Alloys Prepared by Squeeze Casting

Numerical simulation of 7050 aluminum alloy semi-solid squeeze casting

Effects of Rheo-Squeeze Casting Parameters on Microstructure and Mechanical Properties of AlCuMnTi Alloy

Experiment on Microporosity in Squeezing Casting Aluminum Alloy Parts