Abstract:The microstructural features and high-temperature oxidation resistance of hybrid (TiC+TiB) networks reinforced Ti-6Al-4V composites were investigated after fabricated with reaction hot pressing technique. The inhomogeneous distribution of hybrid reinforcers resulted in a sort of stress-induced grain refinement for {\alpha}-Ti matrix phase, which was further facilitated by heterogeneous nucleation upon additive interfaces. HRTEM analyses revealed the crystallographic orientation relation between TiB and alpha-Ti phases as (201)TiB//(-1100)alpha-Ti plus [11-2]//[0001] alpha-Ti, while TiC and {\alpha}-Ti phases maintained the interrelation of (-200)TiC//(-2110) {\alpha}-Ti and [001]TiC//[01-10] alpha-Ti. The hybridly reinforced Ti-6Al-4V/(TiC+TiB) composites displayed superior oxidation resistance to both the sintered matrix alloy and the two composites reinforced solely with TiC or TiB addition during the cyclic oxidation at 873, 973 and 1073 K respectively for 100 h. The hybrid reinforcers volume fraction was a more influential factor to improve oxidation resistance than the matrix alloy powder size. As temperature rose from 873 to 1073 K, the oxidation kinetics transferred from the nearly parabolic type through qusilinear tendency into the finally linear mode. This corresponded to the morphological transition of oxide scales from a continuous protective film to a partially damaged layer and ended up with the complete spallation of alternating alumina and rutile multilayers. A phenomenological model was proposed to elucidate the growth process of oxides scales. The release of thermal stress, the suppression of oxygen diffusion and the fastening of oxide adherence were found as the three major mechanisms to enhance the oxidation resistance of hybrid reinforced composites.

HIGH TEMPERATURE OXIDATION BEHAVIOR OF Fe40Al/TiC COMPOSITES

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

The Oxidation Behaviour of Tic Matrix Ni3al and Fe40al Toughened Composites at High Temperatures

Oxidation behavior of in situ TiCp/Ti6Al4V composite with self-assembled network microstructure fabricated by reaction hot pressing

Oxidation Resistance of In Situ Reaction/Hot Pressing Synthesized Ti2AlC–20% TiB2 Composite at 600–900 °C in Air

High-temperature cyclic oxidation kinetics and microstructural transition mechanisms of Ti-6Al-4V composites reinforced with hybrid (TiC+TiB) networks

High Temperature Oxidation Behavior of Directionally Solidified Fe(Al,Ta)/Fe2Ta(Al) Eutectic Composite

Oxidation Behavior of TiC-containing Ti3AlC2based Material at 500–900 °C in Air

Oxidation behavior of AlN–SiC–TiB2 ceramics synthesized by SHS–HIP

Microstructure and high-temperature oxidation behavior of Ti3AlC 2/W composites

A new high-temperature, oxidation-resistant in situ TiB and TiC reinforced Ti6242 alloy

Effect of Si element on improving the oxidation resistance of hybrid (Ti5Si3 + TiC) particles reinforced Ti6Al4V matrix composites

High Temperature Oxidation Behaviors of BaO/TiO2 Binary Oxide-Enhanced NiAl-Based Composites

Mechanical Properties and Microstructure of Fe40al/Tic Composites with Low Content of Intermetallic

Kinetic Studies of Oxidation of Γ-Alon–tin Composites

New insight on mechanisms of Si element improving the oxidation resistance of titanium matrix composites

Oxidation Behavior of Ternary Carbide Ceramics in Hf–Al–C System in Air

Strength improvement and fracture mechanism in Fe40Al/TiC composites with high content of TiC

Influence Mechanism of Cu on High Temperature Oxidation Behavior of Titanium Alloys

The anti‐oxidation behavior of the Ti3SiC2/Cu composites at high temperatures

Oxidation behavior of high Cr white iron composites reinforced with TiC and nonstoichiometric TiC x in air at 600 °C