Abstract:Numerical simulation of fatigue crack growth in welded joints is not well represented in the literature, especially from the point of view of material heterogeneity in a welded joint. Thus, several case studies are presented here, including some focusing on fracture, presented by two case studies of mismatched high-strength low-alloyed (HSLA) steel welded joints, with cracks in the heat affected zone (HAZ) or in weld metal (WM). For fatigue crack growth, the extended finite element method FEM (XFEM) was used, built in ABAQUS and ANSYS R19.2, as presented by four case studies, two of them without modelling different properties of the welded joint (WJ). In the first one, fatigue crack growth (FCG) in integral (welded) wing spar was simulated by XFEM to show that its path is partly along welded joints and provides a significantly longer fatigue life than riveted spars of the same geometry. In the second one, an integral skin-stringer panel, produced by means of laser beam welding (LBW), was analysed by XFEM in its usual form with stringers and additional welded clips. It was shown that the effect of the welded joint is not significant. In the remaining two papers, different zones in welded joints (base metal—BM, WM, and HAZ) were represented by different coefficients of the Paris law to simulate different resistances to FCG in the two cases; one welded joint was made of high-strength low-alloyed steel (P460NL1) and the other one of armour steel (Protac 500). Since neither ABAQUS nor ANSYS provide an option for defining different fatigue properties in different zones of the WJ, an innovative procedure was introduced and applied to simulate fatigue crack growth through different zones of the WJ and evaluate fatigue life more precisely than if the WJ is treated as a homogeneous material.

A Study on Crack Repair Profiles of Welded Details in FPSO

Investigation of Repair Profiles on Minimizing the SCF of Cracked Welded Details in FPSO

Experimental study on the fatigue failure mechanism of key joints in deepwater semi-submersible platform structures

Calculation of Stress Intensity Factors of Surface Cracks Initiated from Repaired Welded Details under Bending Load

Effect of repair welding on the fatigue behavior of AA6082-T6 T-joints in marine structures based on FFS and experiments

An Investigation on Fatigue Crack Propagation Behavior of Welded Connections in UHPC Reinforced OSDs Using 3D Crack Simulation

Defect assessment of steel catenary risers considering welding residual stress

Fatigue life prediction of weld-joints under variable amplitude fatigue loads

Prediction of crack growth of surface crack at bracket toe of ship under random wave loading condition

Experimental Observation and Simulation on Crack Growth Behavior of An Equivalent Welding Joint for A Deep-Sea Spherical Hull

A Method to Predict Stress Intensity Factor of Surface Crack at Weld Toe of Offshore Structures under Wave Loads

Study on Stress Intensity Factor of Girth Weld with Crack Defects

A Comparative Study of Simplified SIF Calculations of Surface Cracks at Weld Toe

Computations of Stress Intensity Factors for Semi-Elliptical Cracks with High Aspect Ratios by Using the Tetrahedral Finite Element (fully Automated Parametric Study)

Fatigue Crack Growth Calculation of a Surface Crack in a Ship Angular Joint

Calculation of Stress Intensity Factors of Surface Cracks at Weld Toe of Longitudinal Stiffener Joints in a Container

Prediction of Fatigue Crack Growth in a Ship Detail under Wave-Induced Loading

Research on Fatigue of FPSO Welded Structures Based on Hot Spot Stress

Re-Distribution of Welding Residual Stress in Fatigue Crack Propagation Considering Elastic–Plastic Behavior

Numerical Simulation of Fatigue Crack Growth and Fracture in Welded Joints Using XFEM—A Review of Case Studies

Study on the Synergistic Effect of Welding Residual Stress and Hydrogen Diffusion on Fatigue Crack Growth of X80 Steel Pipeline