Abstract:The external ambient temperature plays a crucial role in influencing the hydration process of cemented paste backfill (CPB), causing notable variations in overall structure and physicalmechanical properties. To precisely analyze mechanical properties under different curing temperatures, a uniaxial compression strength (UCS) experiment was conducted. A real-time data acquisition system was established to monitor temperature, volumetric water content, and resistivity. Hydration heat measurement and low-field nuclear magnetic resonance (NMR) experiments were performed to analyze the hydration mechanism and the correlation between mechanical properties and thermal effects during the consolidation period. The study revealed that the relationship between UCS, elastic modulus, and curing temperature can be quantitatively characterized using polynomial functions. The mechanical parameters reach their peak values at a curing temperature of 40 degree celsius. However, exceeding 40 C leads to excessively rapid hydration rates, causing a decrease in hydration degree, and extremely high hydration rates result in reduced microstructure compactness. Under different curing temperature conditions, CPB exhibits substantial temperature effects in terms of volumetric water content, electrical resistivity, hydration heat, and NMR data, effectively characterizing the hydration mechanism. The hydration reaction unfolds through stages: initial induction, accelerated development, decelerated development, stable development, and hardening formation. As the curing temperature rises, the completion times of each stage exhibit a significant exponentially decreasing trend. Moreover, the application of the GA-BP neural network algorithm has unveiled inherent patterns between the monitoring results of CPB's hydration process and its macroscopic strength. Computed results show that the relative errors in predicting strength at various curing temperatures are all less than 0.1 %.

Investigation on Behavior of Thermal Expansion of Hydraulic Cement Paste

Long-term Thermal Performance of Oil Well Cement Modified by Silica Flour with Different Particle Sizes in HTHP Environment

Experimental Study on Thermal Conductivity of Mixed Materials of Sand and Bentonite

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Micromechanics analysis of thermal expansion and thermal pressurization of a hardened cement paste

The effect of undrained heating on a fluid-saturated hardened cement paste

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Influence of Early Hydration Process on the Hydrostatic Pressure Change of Cement Pastes at Different Temperatures

Hydration Mechanism and Mechanical-Thermal Correlation of Cemented Paste Backfill under Different Curing Temperatures

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Research on the Expansive Mechanism of Low Heat Portland Slag Cement with Slight Expansion

Study on Compressive Strength and Thermal Properties of New Cementitious Thermal Storage Material

Study on the rheological properties of Portland cement pastes with polycarboxylate superplasticizers

Influence of polycarboxylate on thermal properties of cementitious solarthermal storage materials

Experimental Study on Temperature Characterization During Cement Grouting Reinforcement

RESEARCH ON THE EXPANSI8VE MECHANISM OF MODERATE HEAT PORTLAND CEMENT WITH SLIGHT EXPANSION

Phase transformation on heating of an aged cement paste

Temperature Dependence of Thermal Diffusivity of OPC and CAC Cement Paste

Freeze–thaw behavior of air entrained cement paste saturated with 10wt.% NaCl solution

The Effect of Curing Temperature on the Properties of Shrinkage-Compensated Binder

Expansion Mechanism of C4A3$-CaSO4-CaO in Portland Cement Paste