Abstract:Specially-shaped composite columns have attracted more and more attention from either industry or academia, due to their benefits for improving efficiency of use and design of indoor space. This paper presents a research programme on the seismic behaviour of an innovative joint between steel beam and L-shaped wide limb composite column (LSWL-CC). Two full-scale cyclic loading tests are introduced, with failure modes, cyclic behaviour, ultimate capacities, rotation performance, ductility, and energy dissipation being clarified. By using SolidWorks, a parametric model of the joints between steel beams and LSWL-CCs is established, and effects of various parameters are analysed by finite element (FE) analyses through ABAQUS. The FE model is validated against the test results. Furthermore, effects of geometry of the RVPs and the column axial compression ratio on the stiffness, bearing capacity, plastic zone and ductility of the joints are analysed. It is found that, triangular RVPs can make the joints possess similar seismic performance compared with the specimens using trapezoid RVPs. It is suggested to locate the RVPs within the width of the flange in case of the beams and columns having identical width. In addition, optimised geometry of the RVPs with a curved edge may lead to better deformation performance for the joints. Specifically, length of the RVP is suggested to be 1.0 similar to 1.2 times height of the beam, its height shall be 1/4 similar to 1/3 of the steel beam height, and its thickness shall be 1.2 times that of the beam flange. The research outcomes may provide valuable information for further research on structures with the L-shaped columns and the joints, and may promote their practical application. Copyright (C) 2021 by The Hong Kong Institute of Steel Construction. All rights reserved.

Load-Carrying Capacity and Stiffness of Beam-Column Joint Strengthened with Stiffening Ring on Irregularly-Arranged Beam

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Load-Carrying Capacity and Practical Calculation Method for Hollow Cylinder Joints Connected with H-Shaped Beams

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Research on the mechanical performance of complicated beam-column joint In Jiangyin Magic Cube Time Square

Design method of RC beam-STCC column joint connected with ring beam

Behaviour of concrete-encased concrete-filled steel tubular column to steel beam joints under cyclic loading

Experimental and Numerical Study on Cyclic Behaviour of Steel Beam-to-column Joints

Study on the Component-Based Model of Semi-Rigid Beam-to-column Joints Initial Stiffness

Finite element analysis on static and dynamic performance of composite beam-to-column joint

BEHAVIOR OF CFST-COLUMN TO STEEL-BEAM JOINTS IN THE SCENARIO OF COLUMN LOSS

Research and optimization on laminated steel tube column-concrete beam joints with outer stiffening ring

Nonlinear FEM Analysis of Steel Beam-to-Concrete Filled Steel Square Tube Column Connections with External Stiffening Rings

A Beam–column Joint Element for Analysis of Reinforced Concrete Frame Structures

EXPERIMENTAL RESEARCH AND NONLINEAR FINITE ELEMENT ANALYSIS ON NEW TYPE JOINT BETWEEN COLUMN AND STEEL BEAM OF CONCRETE-FILLED RECTANGULAR STEEL TUBULAR

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Behaviour Of Reinforced Joints Between Steel Beam And L-Shaped Wide Limb Composite Column

Performance of Concrete-Encased CFST Column-to-beam 3-D Joints under Seismic Loading: Analysis

Seismic behavior study on RC-beam to CFST-column non-welding joints in field construction

Testing and Numerical Modeling of PVC-CFRP Confined Concrete Column-Reinforced Concrete Beam Joint under Axial Load