Abstract:Recent investigations have shown that in the combustion of carbonaceous compounds CO2 and NOx emissions to the atmosphere can be substantially reduced by using a two stage chemical-looping process. In this process, the reduction stage is undertaken in a first reactor in which the framework oxygen of a reducible inorganic oxide is used, instead of the usual atmospheric oxygen, for the combustion of a carbonaceous compound, for instance, methane. The outlet gas from this reactor is mostly composed of CO2 and steam as reaction products and further separation of these two components can be carried out easily by simple condensation of steam. Then, the oxygen carrier found in a reduced state is transported to a second reactor in which carrier regeneration with air takes place at relatively low temperatures, consequently preventing the formation of thermal NOx. Afterward, the regenerated carrier is carried to the first reactor to reinitiate a new cycle and so on for a number of repetitive cycles, while the carrier is able to withstand the severe chemical and thermal stresses involved in every cycle. In this paper, the performance of titania-supported nickel oxides has been investigated in a fixed-bed reactor as oxygen carriers for chemical-looping combustion of methane. Samples with different nickel oxide contents were prepared by successive incipient wet impregnations, and their performance as oxygen carriers was investigated at 900 degrees C and atmospheric pressure in five-cycle fixed-bed reactor tests using pure methane and pure air for the respective reduction and regeneration stages. The evolution of the outlet gas composition in each stage was followed by gas chromatography, and the involved chemical, structural, and textural changes of the carrier in the reactor bed were studied by using different characterization techniques. From the study, it is deduced that the reactivity of these nickel-based oxygen carriers is in the two involved stages and almost independent of the nickel loading. However, in the reduction stage, carbon deposition, from the thermal decomposition of methane, and CO emissions, mainly derived from the partial reduction of titania as support acting as an additional oxygen source, may impose some constraints to the efficiency of the overall chemical-looping combustion process in CO2 capture.

Effect of support additive on reactivity of chemical looping combustion with Ni-based oxygen carrier

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Theoretical Study of the Reactive Mechanisms of Li-Doped Ni-Based Oxygen Carrier during Chemical Looping Combustion

A High-Performance Oxygen Carrier with High Oxygen Transport Capacity and Redox Stability for Chemical Looping Combustion

Enhanced performance of LaFeO3 oxygen carriers by NiO for chemical looping partial oxidation of methane

Highly Active and Anticoke Ni/CeO 2 with Ultralow Ni Loading in Chemical Looping Dry Reforming via the Strong Metal–Support Interaction

Enhanced performance of the CeO2MgO oxygen carrier by NiO for chemical looping CO2 splitting

Insight into the synergy effect on the improved reactivity of spinel NiMn2O4 oxygen carrier in chemical looping combustion

Experimental Investigation of Fe–Ni–Al Oxygen Carrier Derived from Hydrotalcite-like Precursors for the Chemical Looping Gasification of Biomass Char

Activation Mechanism of Fe2O3-Al2O3 Oxygen Carrier in Chemical Looping Combustion

Studies on the synergistically improved reactivity of spinel NiFe2O4 oxygen carrier for chemical-looping combustion

Effects of supports on reduction activity and carbon deposition of iron oxide for methane chemical looping hydrogen generation

Characterization study and five-cycle tests in a fixed-bed reactor of titania-supported nickel oxide as oxygen carriers for the chemical-looping combustion of methane

Chemical looping combustion of biomass-derived syngas using ceria-supported oxygen carriers

An evaluation of the reactivity of synthetic Fe-Ni oxygen carriers: CO oxidation, H2O reforming, and toluene cracking

Enhanced stability of iron-nickel oxygen carriers in biomass chemical looping gasification by core-shell structure

Chemical-Looping Combustion with Iron-Based Oxygen Carries

Effect of Supports on the Redox Performance of Pyrite Cinder in Chemical Looping Combustion

Experiments on chemical looping combustion of coal with a NiO based oxygen carrier

Nanoscale structural transformations in LaFeO 3 oxygen carriers for enhanced reactivity in chemical looping combustion

Effect of Supports on the Redox Performance of NiFe 2 O 4 in a Chemical Looping Process