Abstract:In order to study the influence of mechanical constraints and thermal state on thermoelastic contact nonlinear problem that between cylinder head and cylinder head gasket, a four-body contact simplified model of cylinder head-cylinder head gasket-engine block-bolts was built based on a four-valve diesel engine.Under different bolt preload and thermal state, contact state and deformation of cylinder head plate were calculated by using Augmented Lagrange multipliers as the contact algorithm.Then the influence of contact stresses and nodal displacements of mechanical constraints on some parts of the cylinder head plate were revealed in rated thermal state condition.Moreover the effect of different thermal state on the results was similarly revealed.The study makes clear that, when preload maintains the rated value and burst pressure is exerted, contact stresses in rated thermal state condition of the parts on cylinder head plate that against the cylinder ring and around the screw, which is on exhaust valve side, are similar with those values in cold state, while nodal displacements are reduced, and in different thermal states, the rates of change among the nodal displacements around the screw and both contact stresses and nodal displacements that against the cylinder ring are all less than 2%;with few exceptions, contact stresses and nodal displacements of these parts of the cylinder head plate increase with the increases of the bolt preload.The results also show that cylinder head gasket sealing tests in normal temperature condition is roughly adequate to practical state.

Coupling Thermal Stress Analysis of Engine Cylinder Head

Study of Different Cooling Structures on the Thermal Status of an Internal Combustion Engine

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

The Theoretical and Experimental Study of Temperature Change Effect of Cylinder Head Material

Research on Cylinder Head Thermal State Simulation

Effect of Fire-Deck Thickness on Thermal Status of Cylinder Head

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Analysis and Optimisation of Thermo-Mechanical Coupling Load of Cylinder Head Considering Fluid-Structure Interaction for a Marine High-Power Diesel Engine

Study on Thermoelastic Contact of Cylinder Head-Cylinder Head Gasket-Engine Block

Analysis of Fluid Solid Coupling Heat Transfer in Internal Combustion Engine Considering Boiling Effect

Structural Stress Intensity Analysis of Hybrid Heat Exchangers Based on Thermal Hydraulic Performance in S-CO2 Power Cycle

Thermal and Conjugate Heat Transfer Analysis of Exhaust Manifold of Multi-cylinder IC Engine

Thermal Stresses in a Cylinder Block Casting Due to Coupled Thermal and Mechanical Effects

THERMAL STRESS ANALYSIS OF INTEGRATED COMBUSTION ENGINE PISTON USING CAE TOOLS (ALUMINUM SILICON ALLOY, ALUMINUM SILICON ALLOY STEEL)

Application of Scaled Specimens in Evaluating Thermal Fatigue Performance of Cylinder Head

Design Criterion for Cylinder Head Water-Jacket Based on Boiling Heat Transfer Model

Three-dimensional Numerical Calculation on Flow and Heat Transfer of Cooling-Water in Engine Cylinder Head Jacket by CFD Software STAR-CD

Optimum Design of Cylinder Head Structure Based on Significance Analysis

THERMAL LOAD ANALYSIS AND CONTROL OF FOUR-STROKE HIGH SPEED DIESEL ENGINE

Simulation Study on Cyclic Transient Heat Transfer of Piston-cylinder Liner