Abstract:Nanocrystalline lead zirconate titanate (PZT) powders with composition at the morphotropic phase boundary (MPB) were synthesized by a simple aqueous based sot-gel method, using lead nitrate, zirconium nitrate and tetrabutyl titanate as the starting materials. The sot could be easily transformed into gel, firstly heated at 120 degrees C for 10h, then at 180 degrees C for 24h. The thermal decomposition process of the gel was investigated by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) techniques. The effect of citrate addition amount on the calcining temperature was discussed. The results reveal that pure perovskite phase PZT powders can be obtained at a calcining temperature as low as 600 degrees C. The average grain size of the powders was determined by transmission electron microscope and X-ray diffraction. The influences of calcining temperature and the pH value of the solution on the grain size were investigated. The sintering temperature and electrical properties of the ceramics derived by nano-powders were compared with those prepared by the conventional ceramic processing. The result shows that using the nanopowder, the sintering temperature could be reduced by about 100 degrees C and the ferroelectric properties were enhanced.

Pb(Zr0.9Ti0.05)O3 powders synthesized by PEG modified pechini method: Characterization and sintering behavior

Synthesis of Pb(Zr0.52Ti0.48)O3(PZT) Powder by A Partial Lead Oxalate Coprecipitation Method

Synthesis and characterization of nanocrystalline PZT powders by a simple sol-gel method

Preparation and Characterization of Pb(Zr0.52Ti0.48)O3 Ultrafine Powders by a Sol-Gel Combined with Combustion Process

Synthesis of PbZrO3 Powder by a COprecipitation Method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Processing and characterization of lead zirconate titanate nanopowders by a simple water-based sol-gel method

Synthesis and Thermal Stability of Perovskite PbZr0.52Ti0.48O3 (PZT) Powders Via Precipitation Routes

Synthesis Of Perovskite Pb(Zr0.52ti0.48)O-3 (Pzt) Powders By A Modified Coprecipitation Method

Microstructures and Pyroelectric Properties of Multicomposition 0.9PbZrO<sub>3</sub>·<i>x</i>PbTiO<sub>3</sub>·(0.1−<i>x</i>)Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>Ceramics

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Pva Assisted Synthesis of Nanosized Perovskite Pzt Powder by A Two-Stage Precipitation Route

Synthesis of perovskite Pb(Zr0.52Ti0.48)O3 (PZT) powders by a modified coprecipitation method

Microstructures And Pyroelectric Properties Of Multicomposition 0.9pbzro(3)Center Dot Xpbtio(3)Center Dot(0.1-X)Pb(Zn1/3nb2/3)O-3 Ceramics

Synthesis of PZT nanocrystalline powder by a modified sol-gel process using zirconium oxynitrate as zirconium source

Effects of Synthetic Parameters in Pechini Method on the Formation and Properties of (zro2)0.92(sc2o3)0.08 Solid Solution

Synthesis of PZT Power by Wet-Dry Method and Its Structure

Materials science communication synthesis of pzt nanocrystalline powder by a modified sol-gel process using zirconium oxynitrate as zirconium source

Synthesis of Pb1-xEux(Zr0.52Ti0.48O3 nanopowders by a modified sol-gel process using zirconium oxynitrate source

Poly(vinyl Pyrrolidone)-Assisted Hydrothermal Synthesis of Pb(Zr0.52Ti0.48)O3 Nanocrystals

Phase, Crystal Struture and Sintering Behavior of Shock-Synthesized Pb(Zr0.95Ti0.05)O3 Powders

Pb(Zr0.9Ti0.05)O3 powders synthesized by PEG modified pechini method: Characterization and sintering behavior

Synthesis of Pb(Zr0.52Ti0.48)O3(PZT) Powder by A Partial Lead Oxalate Coprecipitation Method

Synthesis and characterization of nanocrystalline PZT powders by a simple sol-gel method

Preparation and Characterization of Pb(Zr0.52Ti0.48)O3 Ultrafine Powders by a Sol-Gel Combined with Combustion Process

Synthesis of PbZrO3 Powder by a COprecipitation Method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Processing and characterization of lead zirconate titanate nanopowders by a simple water-based sol-gel method

Synthesis and Thermal Stability of Perovskite PbZr0.52Ti0.48O3 (PZT) Powders Via Precipitation Routes

Synthesis Of Perovskite Pb(Zr0.52ti0.48)O-3 (Pzt) Powders By A Modified Coprecipitation Method

Microstructures and Pyroelectric Properties of Multicomposition 0.9PbZrO<sub>3</sub>·<i>x</i>PbTiO<sub>3</sub>·(0.1−<i>x</i>)Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>Ceramics

Synthesis of Perovskite Pb(Zr&lt;sub&gt;0.52&lt;/sub&gt;Ti&lt;sub&gt;0.48&lt;/sub&gt;)O&lt;sub&gt;3&lt;/sub&gt; (PZT) Powders by a Modified Coprecipitation Method

Pva Assisted Synthesis of Nanosized Perovskite Pzt Powder by A Two-Stage Precipitation Route

Synthesis of perovskite Pb(Zr0.52Ti0.48)O3 (PZT) powders by a modified coprecipitation method

Microstructures And Pyroelectric Properties Of Multicomposition 0.9pbzro(3)Center Dot Xpbtio(3)Center Dot(0.1-X)Pb(Zn1/3nb2/3)O-3 Ceramics

Synthesis of PZT nanocrystalline powder by a modified sol-gel process using zirconium oxynitrate as zirconium source

Effects of Synthetic Parameters in Pechini Method on the Formation and Properties of (zro2)0.92(sc2o3)0.08 Solid Solution

Synthesis of PZT Power by Wet-Dry Method and Its Structure

Materials science communication synthesis of pzt nanocrystalline powder by a modified sol-gel process using zirconium oxynitrate as zirconium source

Synthesis of Pb1-xEux(Zr0.52Ti0.48O3 nanopowders by a modified sol-gel process using zirconium oxynitrate source

Poly(vinyl Pyrrolidone)-Assisted Hydrothermal Synthesis of Pb(Zr0.52Ti0.48)O3 Nanocrystals

Phase, Crystal Struture and Sintering Behavior of Shock-Synthesized Pb(Zr0.95Ti0.05)O3 Powders

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method