Abstract:This paper proposes an all−digital calibration algorithm that utilizes a reference channel to suppress the timing mismatch in the Time−Interleaved Analog−to−Digital Converter (TIADC). The output of the reference channel is aligned with each sub−channel in turn, therefore enabling the simultaneous sampling and conversion of the same input signal. First, the statistical characteristics across the channels are employed for estimating the timing mismatch; then, by comparing the output difference between the reference channel and the sub−channels that are sampled simultaneously, the deviation of the derivator can be calibrated. Finally, combining both calibration results yields an accurate final output. This proposed algorithm provides an effective solution to improve TIADC performance in high−speed data acquisition systems. The proposed architecture is applied to a 12−bit 2.4 GS/s four−channel TIADC model, and then its effectiveness is verified. The simulation results exhibit that the Effective Number Of Bits (ENOB) at an input signal frequency of 984 MHz shows a remarkable improvement from 6.88 bits to 11.92 bits. The effectiveness of this technique is also demonstrated through the off−chip calibration of a commercial 12−bit four−channel 2 GS/s TIADC using a 680 MHz input signal that is based on the actual chip results.

A Calibration Architecture for Improving the Performance of Time-Interleaved ADC

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A Digital-Background TIADC Calibration Architecture and a Fast Calibration Algorithm for Timing-Error Mismatch

A Wideband Timing Mismatch Calibration Design for Time-Interleaved Analog-to-Digital Converters with Fast Convergence

A Digital Background Calibration Method for Time-Interleaved ADCs Based on Frequency Shifting Technique

Lms-Fir Based Digital Background Calibration For The Four-Channel Time-Interleaved Adc

The fast time-interleaved ADC channel mismatch calibration method based on equivalent sampling and dynamic reference point

Machine-Learning Based Mismatch Calibration for Time-Interleaved ADCs

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

Adaptive Calibration of Channel Mismatches in Time-Interleaved ADCs Based on Equivalent Signal Recombination

Recent Progress on Calibration Methods of Timing Skew in Time-Interleaved ADCS.

Efficient Calibration of Time-Interleaved ADCs via Separable Nonlinear Least Squares

Estimation and calibration for channel mismatches in high-speed ADC systems

Calibration of Offset and Gain Mismatches in Time-Interleaved AD Converters

A Full-Band Timing Mismatch Calibration Technique in Time-Interleaved ADCs.

A 14-Bit 200-Ms/s Time-Interleaved Adc with Sample-Time Error Calibration

A Low-Complexity Timing Mismatch Calibration Method for Four-Channel Time-Interleaved ADCs Based on Cross Correlation

A Timing Mismatch Background Calibration Algorithm with Improved Accuracy.

A Digital Timing Mismatch Calibration Technique in Time-Interleaved ADCs.

Channel Mismatch Calibration In Time-Interleaved Adcs Based On One-Dimensional Optimization And Trigger