Abstract:Sample time error can degrade the performance of time-interleaved analog to digital converters (TIADCs). A fully digital background algorithm is presented in this paper to estimate and correct the timing mismatch errors between four interleaved channels, together with its hardware implementation. The proposed algorithm provides low computation burden and high performance. It is based on the simplified representation of the coefficients of the Lagrange interpolator. Simulation results show that it can suppress error tones in all of the Nyquist band. Results show that, for a four-channel TIADC with 10-bit resolution, the proposed algorithm improves the signal to noise and distortion ratio (SNDR) and spurious-free dynamic range (SFDR) by 19.27 dB and 35.2 dB, respectively. This analysis was done for an input signal frequency of (0.09f_s). In the case of an input signal frequency of (0.45f_s), an improvement by 33.06 dB and 43.14 dB is respectively achieved in SNDR and SFDR. In addition to the simulation, the algorithm was implemented in hardware for real-time evaluation. The low computational burden of the algorithm allowed an FPGA implementation with a low logic resource usage and a high system clock speed (926.95 MHz for four channel algorithm implementation). Thus, the proposed architecture can be used as a post-processing algorithm in host processors for data acquisition systems to improve the performance of TIADC.

A Low-Complexity Timing Mismatch Calibration Method for Four-Channel Time-Interleaved ADCs Based on Cross Correlation

All-Digital Calibration of Timing Mismatch Error in Time-Interleaved Analog-to-Digital Converters.

A Digital-Background TIADC Calibration Architecture and a Fast Calibration Algorithm for Timing-Error Mismatch

A Channel Multiplexing Digital Calibration Technique for Timing Mismatch of Time-Interleaved ADCs

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

Lms-Fir Based Digital Background Calibration For The Four-Channel Time-Interleaved Adc

A Wideband Timing Mismatch Calibration Design for Time-Interleaved Analog-to-Digital Converters with Fast Convergence

A Novel Autocorrelation-Based Timing Mismatch C Alibration Strategy in Time-Interleaved ADCs

An improved wide-range, low-complexity, fully-parallel digital background timing mismatch calibration method for dual-channel TIADC based on perfect reconstruction filter bank

A Digital Timing Mismatch Calibration Technique in Time-Interleaved ADCs.

Digital background calibration algorithm and its FPGA implementation for timing mismatch correction of time-interleaved ADC

An All-Digital Background Calibration Technique for M-Channel Downsampling Time-Interleaved ADCs Based on Interpolation

A Foreground Digital Calibration Algorithm for Time-Interleaved Adcs with Low Computational Complexity

Blind adaptive calibration of timing error for two- channel time-interleaved ADCs

The fast time-interleaved ADC channel mismatch calibration method based on equivalent sampling and dynamic reference point

Machine-Learning Based Mismatch Calibration for Time-Interleaved ADCs

A 14-Bit 200-Ms/s Time-Interleaved Adc with Sample-Time Error Calibration

TI-ADC multi-channel mismatch estimation and calibration in ultra-high-speed optical signal acquisition system

Spectrum distribution‐based blind calibration method of mismatches for time‐interleaved ADCs

All-Digital Background Calibration for Time-Interleaved ADC Using Differential Fir Filter