Abstract:Three-dimensional molecular dynamics (MD) simulations have been performed to investigate behaviors of nanoindentation and nano-scratch. The first case concerns the effects of material defect on the nanoindentation of nickel thin film. The defect is modeled by a spherical void embedded in the substrate and located under the surface of indentation. The simulation results reveal that compared to the case without defect, the presence of the void softens the material and allows for larger indentation depth at a given load. MD simulations are then performed for nano-scratch of single crystal copper, with emphasis on the effect of indenter shape (sharp and blunt) on the substrate deformation. The results show that the blunt indenter causes larger deformation region and much more dislocations at both the indentation and scratch stages. It is also found that during the scratching stage the blunt indenter results in larger chip volume in front of the indenter and gives rise to more friction than the sharp indenter. The scope of the simulations has been extended by introducing a multiscale model which couples MD simulations with Finite Element Method (FEM), and multiscale simulations are performed for two-dimensional nanoindentation of copper. The model has been validated by well-consistent load-depth curves obtained from both multiscale and full MD simulations, and by good continuity of deformation observed in the handshake region. The simulations also reveal that indenter radius and indentation velocity significantly affect the nanoindentation behavior. By use of multiscale method, the system size to be explored can be greatly expanded without increasing much computational cost.

Micro-scale Numerical Simulation on Dynamic Damage for Metal Materials

Microscale Numerical Simulation On Dynamic Damage For The Deflagrated Pressure Vessels

Molecular dynamics simulation on nanoindentation response of a copper workpiece

0701 Molecular Dynamics Simulation of Nano-Contact Between a Diamond Cutting Tool and a Copper Surface

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

DAMAGE ACCUMULATION, FRACTURE AND POST FRACTURE ANALYSES FOR INITIALLY FLAWED STEEL STRUCTURES

Dynamic Failure Simulation of Metal Materials and Structures under Blast and Impact Loading

Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials

Molecular Dynamics And Multiscale Simulations Of Nanoindentation And Nanoscratch

Numerical analysis for failure evolution process of rock with initial micro defects

Dynamic Damage Problems of Damaged Materials

The simultaneous macroscopic and mesoscopic numerical simulation of metal spalling by using the fine-mesh finite element—smoothed particle hydrodynamics adaptive method

MULTISCALE MATERIALS MODELING METHOD AND ITS APPLICATION IN MATERIALS WITH DEFECTS

Numerical simulation for the dynamic failure process in brittle materials

Numerical Simulation of Metal Sheet Damage under High-Speed Tangential Airflow and Laser Irradiation

Experimental Study of the Spatial Discontinuity of Dynamic Damage Evolution

Atomic simulation study on the effect of defects on nano-cutting mechanism of single crystal copper

Numerical Investigation into Using Coarse Meshes to Predict Damage Behaviors of Laminated Composites Subjected to Low-Velocity Impact

NUMERICAL SIMULATION FOR DEFORMATION OF NANO-GRAINED METALS

Dynamic mechanical behavior of microelectronic components determined by impact shear

Numerical Simulation and Dynamic Fracture Criteria of Thin Cylindrical Shells under Inner Explosive Loading