Abstract:Mesoporous manganese oxides (MnO2) microspheres were synthesized by the first chemical deposition of manganese carbonate (MnCO3) precursors at room temperature and followed by the low-temperature calcinations under 300,350 and 400 degrees C. The obtained MnO2 materials exhibit the Akhtenskite type MnO2 crystalline microstructures and the microspherical morphologies with the diameter of about 1 mu m. The as-synthesized MnO2 microspheres under 300 degrees C exhibit the largest specific area (240.5 m(2) g(-1)) and the optimal mesopore volume (0.231 cm(3) g(-1)) than the other two samples under 350 and 400 degrees C (111.4, 106.3 m(2) g(-1); 0.055, 0.021 cm(3) g(-1)), which contribute to the optimal electrochemical performances for supercapacitors. Moreover, the as-synthesized MnO2 microspheres under 300 degrees C possess the highest tap density (1.156 g cm(-3)) than the other two samples (1.126, 1.043 g cm(-3)), leading to the more feasibility for practical applications in supercapacitors. The as-fabricated MnO2 electrode exhibits a high specific capacitance (129 F g(-1) at 0.25 A g(-1)) and high-rate capability (68 F g(-1) at 4A g(-1)). The as-assembled activated carbon (AC)//MnO2 hybrid capacitor exhibits a wide working voltage (1.8V), high power and energy densities (2197 W kg(-1) and 12.8W h kg(-1) at 4 A g(-1)), excellent cycling behavior (94.3% capacitance retention after 5000 cycles at 1 A g(-1)), and excellent capacitance recovery performances under different rates (0.25-4 A g(-1)) for tested 4500 cycles, indicating the promising prospective of the easily fabricated mesoporous MnO2 microspheres for practical applications in supercapacitors. (C) 2013 Elsevier Ltd. All rights reserved.

Mesoporous Amorphous Mno2 As Electrode Material for Supercapacitor

Facile Fabrication of Mesoporous Manganese Oxides As Advanced Electrode Materials for Supercapacitors

Manganese Oxide-Based Electrode Behavior As Materials for Electrochemical Supercapacitors

Amorphous Porous Molybdenum Dioxide as an Efficient Supercapacitor Electrode Material

Facile Synthesis and Characterization of MnO2 Nanomaterials As Supercapacitor Electrode Materials

Synthesis of MnO2/N-doped Ultramicroporous Carbon Nanospheres for High-Performance Supercapacitor Electrodes

Nanostructured MnO2: Hydrothermal Synthesis and Electrochemical Properties As a Supercapacitor Electrode Material

Facile Synthesis of Tremella-Like MnO2 and Its Application As Supercapacitor Electrodes

MnO2 Depositing on the Surface of Hollow Porous Carbon Microspheres for Supercapacitor Application

Three-Dimensional Network Mesoporous Nanostructured Alpha-Manganese Dioxide with High Supercapacitive Performance: Facile, Environmental and Large-Scale Synthesis

Ultrastable MnO2 Nanoparticle/three-Dimensional N-doped Reduced Graphene Oxide Composite As Electrode Material for Supercapacitor

Synthesis and Electrochemical Properties of Semicrystalline Gyroidal Mesoporous Mno2

Facile Synthesis of Mesoporous MnO2 Microspheres for High Performance AC//MnO2 Aqueous Hybrid Supercapacitors

Manganese Hexacyanoferrate/mno2 Composite Nanostructures As a Cathode Material for Supercapacitors

Rapid Synthesis of Graphene/amorphous Α-Mno2 Composite with Enhanced Electrochemical Performance for Electrochemical Capacitor

3D Network Mesoporous Beta -Manganese Dioxide: Template-free Synthesis and Supercapacitive Performance

Synthesis of MnO2/ZSM-5 Molecular Sieve Composites activated by CO2 as Electrode Material for Supercapacitors

Template-Assisted Synthesis of Porous Manganese Dioxide Hollow Rods as Supercapacitor Electrode Material

Synthesis and Characterization of Nickel-doped Manganese Dioxide Electrode Materials for Supercapacitors

Synthesis and Kinetic Analysis of «-MnO2 Nanowires for Supercapacitor Electrode

Hierarchical Manganese Oxide/Carbon Nanocomposites for Supercapacitor Electrodes