Abstract:A facile strategy is developed for the synthesis of MnO2 nanoflakes/hierarchical porous carbon spheres (HPCs) nanocomposites via a two-step redox process. The external MnO2 nanoflakes with thickness of similar to 10 nm deposited on the surface of the HPCs result in the formation of hierarchical architecture of the composites, while the internal MnO2 layer stabilizes the interaction between MnO2 nanoflakes and HPCs. The resultant composites still retain porous structure after removal of mesoporous SiO2 template and exhibit relatively high specific surface area. The morphology control of the composites can be easily achieved by varying the initial content of Mn(NO3)(2) and KMnO4. Electrochemical performance of the composites as supercapacitor electrode materials was evaluated by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy techniques. The MnO2 nanoflakes/HPCs composite with 75 wt% MnO2 possesses the highest specific capacitance at a high scan rate or current density (417.2 F g (1) at 20 mV s (1) and 326.9 F g (1) at 1 A g (1), respectively) and extraordinary cycling stability (slightly over 100% capacitance retention after 10000 cycles at a scan rate of 100 mV s (1)), which are superior to other reported MnO2/carbon composites. The results suggest that rational design and synthesis of MnO2/porous carbon composite electrode materials with maximum electrochemical active sites is important to further improve their electrochemical performance. (C) 2015 Elsevier Ltd. All rights reserved.

Synthesis of MnO2/ZSM-5 Molecular Sieve Composites activated by CO2 as Electrode Material for Supercapacitors

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Manganese Oxide-Based Electrode Behavior As Materials for Electrochemical Supercapacitors

Synthesis of MnO2/N-doped Ultramicroporous Carbon Nanospheres for High-Performance Supercapacitor Electrodes

One-step Large Scale Combustion Synthesis Mesoporous MnO2/MnCo2O4 Composite As Electrode Material for High-Performance Supercapacitors

MnO2/Carbon Composites for Supercapacitor: Synthesis and Electrochemical Performance

MnO2 Nanoflakes/hierarchical Porous Carbon Nanocomposites for High-Performance Supercapacitor Electrodes

Sodium Dodecylbenzene Sulfonate Assisted Electrodeposition of MnO2@C Electrode for High Performance Supercapacitor

MnO2 Depositing on the Surface of Hollow Porous Carbon Microspheres for Supercapacitor Application

Facile Fabrication of Mesoporous Manganese Oxides As Advanced Electrode Materials for Supercapacitors

Sodium Dodecylbenzene Sulfonate Assisted Electrodeposition of MnO 2 @C Electrode for High Performance Supercapacitor

Co2SnO4/activated Carbon Composite Electrode for Supercapacitor

Assembling MnCo2O4 nanoparticles embedded into MXene with effectively improved electrochemical performance

Preparation and Electrochemical Properties of Mesoporous Manganese Dioxide-Based Composite Electrode for Supercapacitor

Controllable Preparation of Graphene/mno2/co3o4 for Supercapacitors

Porous ZnO-Coated Co3O4 Nanorod as a High-Energy-Density Supercapacitor Material.

Mesostructured Carbon Nanotube-on-MnO2 Nanosheet Composite for High-Performance Supercapacitors

Manganese Hexacyanoferrate/mno2 Composite Nanostructures As a Cathode Material for Supercapacitors

Synthesis of Reduced Graphene Nanosheet/urchin-Like Manganese Dioxide Composite and High Performance As Supercapacitor Electrode

Facile Synthesis of MnO2 Grown on Nitrogen-Doped Carbon Nanotubes for Asymmetric Supercapacitors with Enhanced Electrochemical Performance

Facile Synthesis of Nitrogen-Doped Graphene Quantum Dots/MnCO3/ZnMn2O4 on Ni Foam Composites for High-Performance Supercapacitor Electrodes