Abstract:Bi2Te3-based compounds are currently the most commercially relevant thermoelectric materials near room temperature. They are prepared via hot pressing, hot deformation, spark plasma sintering, and other consolidation processes, which are typically performed at 400–500 °C. Such high-temperature processes are energy-intensive and generate unnecessary waste heat, making them undesirable for a large-scale production. In this study, a low-temperature liquid-phase-assisted sintering (or so-called cold-sintering) process was employed to fabricate p-type Bi0.5Sb1.5Te3 bulk materials at temperatures below 150 °C. At the optimal sintering temperature (130 °C), a ZT value as high as 0.56 at 450 K can be achieved, competitive to that of a commercial Bi0.5Sb1.5Te3 ingot (ZT 0.8–1.0). The addition of a small amount of transient liquid facilitates grain reorientation and expedites a mass transfer process under axial compaction and liquid evaporation conditions, thus resulting in nearly fully densified Bi0.5Sb1.5Te3 pellet samples (>97% theoretical density). Furthermore, the low-temperature sintering process results in the reduction of grain size and promotes twin boundaries, resulting in a low lattice thermal conductivity of 0.57 W m–1 K–1 at 380 K due to phonon scattering. The strategy reported in this work can be used not only as a substitute for high-temperature sintering of other thermoelectric materials but also to engineer phonon scattering for high-performance thermoelectrics.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c03540.Single parabolic band model and calculated transport properties; EBSD analysis for pellet sintered at 110 °C; BSE, EDS mapping, and TEM images of pellet sintered at 130 °C; average ZT values; and XPS results (PDF)This article has not yet been cited by other publications.

A Chemical Solution Route to Rapid Synthesis of Homogeneous Bi100-Xsbx Alloys Nanoparticles at Room Temperature

Controllable Synthesis of One-Dimensional Chinelike Superstructures of Homogeneous Bi100–xSbx Alloys Via a Template-Free Electrodeposition

Bi(1)-(x)Sb(x) alloy nanocrystals: colloidal synthesis, charge transport, and thermoelectric properties.

Solvothermal Preparation and Characterization of Nanocrystalline Bi2te3 Powder with Different Morphology

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Sonoelectrochemical synthesis and assembly of bismuth-antimony alloy: from nanocrystals to nanoflakes.

Length and composition tunable Sb–Bi–S nanowires for optoelectronic devices prepared via an isostructure-favored solvothermal synthesis

Solution-Phase Synthesis of Alloyed Ba(Zr1-xTix)S3 Perovskite and Non-Perovskite Nanomaterials

Ultrasonic Synthesis of Nanocrystals of Metal Selenides and Tellurides

Alloying-Induced Structural Transition in the Promising Thermoelectric Compound CaAgSb

The Effect of In Concentration and Temperature on Dissolution and Precipitation in Sn–Bi Alloys

Synthesis and characterization of nanocrystalline NiSb and NiSb2 at low temperature

Large-area 2D bismuth antimonide with enhanced thermoelectric properties via multiscale electron-phonon decoupling

Cold-Sintered Bi 2 Te 3 -Based Materials for Engineering Nanograined Thermoelectrics

A solvothermal decomposition process for fabrication and particle sizes control of Bi<sub>2</sub>S<sub>3</sub> nanowires

A facile "dispersion-decomposition" route to metal sulfide nanocrystals

Synthesis, Bottom up Assembly and Thermoelectric Properties of Sb-Doped PbS Nanocrystal Building Blocks

Synthesis of monodispersed ultrafine Bi2S3 nanocrystals

Flower-like nanostructure and thermoelectric properties of hydrothermally synthesized La-containing Bi2Te3 based alloys

Synthesis and Thermoelectric Properties of Bi2te3 Based Nanocomposites

Enhanced thermoelectric properties of Pb1-xBixS prepared with hydrothermal synthesis and microwave sintering