Abstract:Design of thermoelectric materials focuses on the optimization of several unfavorably coupled factors: electrical conductivity, Seebeck coefficient, and thermal conductivity. Recent work in thermoelectrics has focused on decreasing lattice thermal conductivity by nanostructuring thermoelectric materials, while recent work in photovoltaics has demonstrated ligand stripping as a means to increased electron mobility in thin films of nanoparticles. In the present work, these two features are combined. A multigram scale synthesis of dispersible, lead telluride nanocrystals (25-50 nm) is developed using hot-injection methods in common organic solvents. These nanocrystals (NCs) are ligand stripped with sulfide (PbTe-S) or iodide (PbTe-I) sources to result in p-type or n-type materials with large Seebeck coefficients at room temperature of 520 or -540 mu V.K-1, respectively. Sequential stripping with sulfide and then iodide (PbTe-SI) resulted in a small Seebeck due to counter doping. PbTe-S and PbTe-SI are found to generate nanostructured composites by growth of lead sulfide nanocrystals (similar to 50-60 nm) in situ upon annealing. However, the electrical conductivities are low (<1 S.cm(-1)) due to excess doping during the ligand stripping. Intentional formation of a nanocomposite (PbTe-PbS) is achieved by combining PbTe NCs with 4-6 nm diameter lead sulfide particles via mixing by incipient wetness with a target of 8 mol % lead sulfide. The resulting nanocomposite is n-type with a Seebeck coefficient of -160 mu V.K-1 and an electrical conductivity of 42 S.cm(-1) at room temperature. The lattice thermal conductivities of all materials at room temperature are substantially lower than those of bulk lead telluride (2.0 W m(-1).K-1). However, thermoelectric figure of merit (ZT) values are low for all samples (maximum ZT = 0.03 for PbTe-PbS), attributed primarily to the low electrical conductivities. This work underscores the importance of developing new methods for augmenting electrical conductivity if nanoparticle assemblies are to be practically employed in thermoelectrics.

Synthesis, Bottom up Assembly and Thermoelectric Properties of Sb-Doped PbS Nanocrystal Building Blocks

Core-Shell Nanoparticles As Building Blocks for the Bottom-Up Production of Functional Nanocomposites: Pbte-Pbs Thermoelectric Properties

Band Engineering Through Pb‐Doping of Nanocrystal Building Blocks to Enhance Thermoelectric Performance in Cu3SbSe4

Nanostructures Boost the Thermoelectric Performance of PbS

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Enhancing the Thermoelectric and Mechanical Properties of p-Type PbS through Band Convergence and Microstructure Regulation

Thermoelectric Properties of PbSe Nanocomposites from Solution-Processed Building Blocks

High Performance Thermoelectrics from Earth-Abundant Materials: Enhanced Figure of Merit in PbS by Second Phase Nanostructures.

A Facile Surfactant-assisted Reflux Method for the Synthesis of Single-Crystalline Sb2Te3 Nanostructures with Enhanced Thermoelectric Performance.

Tunable Synthesis and Thermoelectric Property of Bi2S3 Nanowires

Room temperature aqueous-based synthesis of copper-doped lead sulfide nanoparticles for thermoelectric application

Enhanced thermoelectric performance of hot-press Bi-doped n-type polycrystalline PbS

Design of Lead Telluride Based Thermoelectric Materials Through Incorporation of Lead Sulfide Inclusions or Ligand Stripping of Nanosized Building Blocks

Enhanced Thermoelectric Performance of Solution-Derived Bismuth Telluride Based Nanocomposites Via Liquid-Phase Sintering

Strong enhancement of phonon scattering through nanoscale grains in lead sulfide thermoelectrics

High Performance Thermoelectrics from Earth-Abundant Materials: Enhanced Figure of Merit in Pbs Through Nanostructuring Grain Size

Thermoelectrics with Earth Abundant Elements: High Performance P-Type PbS Nanostructured with SrS and CaS

High Performance Na-doped PbTe-PbS Thermoelectric Materials: Electronic Density of States Modification and Shape-Controlled Nanostructures.

Enhanced thermoelectric properties of Pb1-xBixS prepared with hydrothermal synthesis and microwave sintering

Solvothermal Synthesis and Growth Mechanism of Ag and Sb Co-Doped PbTe Heterogeneous Thermoelectric Nanorods and Nanocubes

Realizing High Thermoelectric Performance in Bi0.4Sb1.6Te3 Nanosheets by Doping Sn Element