Abstract:In this paper, a comprehensive dynamic model is proposed to analyze the dynamic behaviors of the rotor–bearing system. Three types of excitation including the bearing waviness, the unbalanced force and the finite number of balls (varying compliance effect) are considered. Based on the extended Jones–Harris model with five degrees of freedom, the load distribution and then the stiffness of the angular contact ball bearing are obtained theoretically. After introducing the three types of excitation into the model, the bearing stiffness matrix becomes time-varying and many parametric frequencies are found due to the multiple excitations. Then, the stability problems of the parametrically excited rotor–bearing system are investigated utilizing the discrete state transition matrix method (DSTM). The simple instability regions arising from the translational and the angular motions are analyzed respectively. The effects of the amplitude and the initial phase angle of the bearing waviness, the rotor eccentricity, the bearing preload and the damping of the rotating system on the instability regions are discussed thoroughly. It is shown that the waviness amplitudes have significant influences on the instability regions, while the initial phase angles of the waviness almost have no effect on the instability regions. The rotor eccentricity just affects the widths of the instability regions. The increasing of the bearing preload only shifts the positions of the instability regions. Damping could reduce the instability regions but it could not diminish the regions completely.

The Speed Stability Criterion of the Rotary Cylinder with Eccentric Load

Study on Velocity Stability of Rotary Cylinder with Eccentric Load

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Dynamic modeling and vibration response analysis of high speed motorized spindle

Vibrational Characteristics of Rotating Soft Cylinders

Weight Estimation of Rotor Eccentric Load Based on Acceleration Sensor

Dynamic instability of an eccentrically rotating ring-shaped structure

Reducing Influence Of Eccentric Load On Dynamic Characteristics Of Rotary Actuator

Kinematics Model and Acceleration Simulation Algorithm for a Three-Axis Centrifuge

Stability Influence Of Different Eccentric Phases In A Rotor-Bearing System

The influence of the geometric eccentricity on the dynamic behaviors of helical gear systems

Double static analysis of multi-rotor system with squeeze film damper

Stiffness characteristics and experimental study of angular contact ball bearings considering the influence of rotational speed

Nonlinear Behavior and Stability Analysis of Dual-Disc Over-Hung Rub-Impact Rotor under Gyroscopic Action

A Comprehensive Dynamic Model to Investigate the Stability Problems of the Rotor–bearing System Due to Multiple Excitations

Analysis of lubrication characteristics of dynamic-static pressure hybrid thrust bearing considering key factors under eccentric loads

Double Static Analysis of Muti-Rotor System with Squeeze Film Damper

Analysis of Dynamic Characteristics of Rotor-bearing System of High Speed Spindle

Payload Oscillation Modeling and Error Analysis for Rotary Crane

A Coupled Model of Angular-Contact Ball Bearing–Elastic Rotor System and Its Dynamic Characteristics Under Asymmetric Support

Electromagnetic Vibration Characteristics of an Eccentric Rotor with a Static Load