The influence of the geometric eccentricity on the dynamic behaviors of helical gear systems

Baishun Zhao,Yifan Huangfu,Hui Ma,Zhifang Zhao,Kun Wang

DOI: https://doi.org/10.1016/j.engfailanal.2020.104907

IF: 4

2020-12-01

Engineering Failure Analysis

Abstract:<p>Geometric eccentricity error is unavoidable in gear systems, resulting that the center of mass and center of rotation do not coincide with each other. The gear center distance and condition of gear tooth engagement are time-varying during the process of gear meshing. The effect of the geometric eccentricity should be involved in both the quasi-static and dynamic analysis. An improved loaded tooth contact analysis method considering geometric eccentricities is proposed and the mesh stiffness is validated by the result in a published literature. The contact state changes significantly during the process of meshing because of the geometric eccentricity. Then the dynamic model of the gear system is established. It is found that there are sideband frequencies around the meshing frequency of the gear pair with geometric eccentricities. This feature is consistent with the experimental results. Finally, the dynamic response under different initial eccentric phase is discussed.</p>

engineering, mechanical,materials science, characterization & testing