Abstract:The maximum power generated in a single-chamber air-cathode microbial fuel cell (MFC) has previously been shown to increase when the spacing between the electrodes is decreased from 4 to 2 cm. However, the maximum power from a MFC with glucose (500 mg/L) decreased from 811 mW/ m(2) (R-ex = 200 Omega, Coulombic efficiency of CE = 28%) to 423 mW/m(2) (Rex = 500 Omega, CE = 18%) when the electrode spacing was decreased from 2 to 1 cm (batch mode operation, power normalized by cathode projected area). This decrease in power was unexpected as the internal resistance decreased from 35 Omega (2-cm spacing) to 16 Omega (1-cm spacing). However, providing advective flow through the porous anode toward the cathode substantially increased power, resulting in the highest maximum power densities yet achieved in an air-cathode system using glucose or domestic wastewater as substrates. For glucose, with a 1-cm electrode spacing and flow through the anode with continuous flow operation of the MFC, the maximum power increased to 1540 mW/m(2) (51 W/m(3)) and the CE increased to 60%. Using domestic wastewater (255 +/- 10 mg of COD/L), the maximum power density was 464 mW/m(2) (15.5 W/m(3); CE = 27%). Although flow through the anode could lead to plugging, especially for particulate substrates such as domestic wastewater, the system was operated using glucose for over 42 days without clogging. These results show that power output in this air-cathode single-chamber MFC can be increased by reducing the electrode spacing if the reactors are operated in continuous flow mode with advective flow through the anode toward the cathode.

Electrode Configuration As a Factor Affecting Electricity Generation in Air-Cathode Microbial Fuel Cell

[Electricity Generation Using the Short-Arm Air-Cathode Microbial Fuel Cell].

Microbial Fuel Cells: the Effects of Configurations, Electrolyte Solutions, and Electrode Materials on Power Generation

Temporal Variations of Cathode Performance in Air-Cathode Single-Chamber Microbial Fuel Cells with Different Separators

Increased Power Generation in a Continuous Flow MFC with Advective Flow Through the Porous Anode and Reduced Electrode Spacing

Increased sustainable electricity generation in up-flow air-cathode microbial fuel cells.

Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration.

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

A Graphite-Granule Membrane-Less Tubular Air-Cathode Microbial Fuel Cell for Power Generation under Continuously Operational Conditions

Performance of Microbial Fuel Cell with Air-cathode

Enhanced Electricity Generation of a 1.2-L Microbial Fuel Cell with Acclimation of Applied Voltage

Cathode Assessment For Maximizing Current Generation In Microbial Fuel Cells Utilizing Bioethanol Effluent As Substrate

Electricity Generation And Microbial Community Changes In Microbial Fuel Cells Packed With Different Anodic Materials

Increasing Power Generation for Scaling Up Single-Chamber Air Cathode Microbial Fuel Cells.

Enhancing the stability of power generation of single-chamber microbial fuel cells using an anion exchange membrane

Pre-acclimation of a wastewater inoculum to cellulose in an aqueous-cathode MEC improves power generation in air-cathode MFCs.

Ion Exchange Membrane Cathodes For Scalable Microbial Fuel Cells

Intermittent Contact of Fluidized Anode Particles Containing Exoelectrogenic Biofilms for Continuous Power Generation in Microbial Fuel Cells

Different Electrode Configurations to Optimize Performance of Multi-Electrode Microbial Fuel Cells for Generating Power or Treating Domestic Wastewater

Fuel cell thermal management system based on microbial fuel cell 3-D multi-phase flow numerical model

Anode Modification with Capacitive Materials for a Microbial Fuel Cell: an Increase in Transient Power or Stationary Power