Development of Microbial Community Within the Cathodic Biofilm of Single-Chamber Air-Cathode Microbial Fuel Cell.
Guofang Xu,Xiyuan Zheng,Yaobin Lu,Guangli Liu,Haiping Luo,Xiao Li,Renduo Zhang,Song Jin
DOI: https://doi.org/10.1016/j.scitotenv.2019.02.175
IF: 9.8
2019-01-01
The Science of The Total Environment
Abstract:The aim of this study was to investigate the development of microbial community within the cathodic biofilm of single-chamber air-cathode microbial fuel cell (MFC). To analyze microbial community structures within cathodic biofilm, cathodic biofilm samples were stratified into three layers, i.e., the cathode-side layer (0-40 mu m), the middle layer (40-80 mu m), and the anolyte-side layer (80-120 mu m). After four starting cycles (0-188 h), the maximum power densities of the MFC fed with 1 g/L acetate decreased from 1056 +/- 110 to 410 +/- 50 mW/m(2) within 15 cycles (similar to 30 d) of operation. The relative abundance of Pseudomonas gradually increased from 18.9% in the 1st cycle to 50.2% in the 4th cycle. After 15 cycles, the relative abundance of Pseudomonas became 53.8%, 16.4%, and 8.90% in the middle, anolyte-side, and cathode-side layers, respectively. The aerobic bacteria within the cathodic biofilm increased from 24% in the anodyte-side layer to 43% in the cathode-side layer. The relative abundance of Methanobrevibacter was 42.1% and 37.2% after 3 and 15 cycles, respectively. The bacterial community structures were similar among cycles 2, 3, and 4, but significantly different in the 15th cycle. The results from this study should be useful to understand the mechanism of the cathodic biofilm formation and to develop strategies to enhance performance of the MFC. (c) 2019 Elsevier B.V. All rights reserved.