Abstract:Background: Microbial fuel cells (MFCs) offer a promising approach for treating wastewater and generating electrical energy simultaneously. However, their implementation in wastewater treatment plants is hindered by the limited electricity generation, often attributed to the electrolyte's high resistance. This study aimed to improve bioelectricity generation in MFCs by adding nanomaterials to the electrolyte to enhance conductivity. Results: Three types of nanomaterials, carbon nanotubes (CNTs), graphitic carbon nitride (g‐C3N4), and reduced graphene oxide (r‐GO), were synthesized and addition to the electrolyte at a concentration of 50 mg in 1.5 L. MFC performance was evaluated, employed a Hydraulic Retention Time (HRT) of 140 h, and compared to a control with no nanomaterials added. The addition of nanomaterials significantly improved MFC performance. Compared to the control, the MFCs with CNTs, g‐C3N4, and r‐GO exhibited: Higher voltage: 1.301 V (CNTs), 1.286 V (g‐C3N4), 1.280 V (r‐GO) vs. 0.570 V (control), Increased power density: 14.11 mW/m3 (CNTs), 13.78 mW/m3 (g‐C3N4), 13.66 mW/m3 (r‐GO) vs. 2.71 mW/m3 (control), Enhanced areal power density: 21.06 mW/m2 (CNTs), 20.57 mW/m2 (g‐C3N4), 20.39 mW/m2 (r‐GO) vs. 4.04 mW/m2 (control), and Improved coulombic efficiency: 19.43% (CNTs), 19.19% (g‐C3N4), 19.11% (r‐GO) vs. 8.54% (control). Conclusion: Incorporating nanomaterials into the MFC electrolyte significantly increased bioelectricity generation by 5.21 times and coulombic efficiency by 2.28 times compared to the control. This improvement is attributed to the high specific surface area of the nanomaterials, which facilitates the adhesion and growth of microorganisms around the anode, enhancing direct electron transfer. This article is protected by copyright. All rights reserved.

Ammonia Treatment of Carbon Cloth Anodes to Enhance Power Generation of Microbial Fuel Cells

Use of Carbon Mesh Anodes and the Effect of Different Pretreatment Methods on Power Production in Microbial Fuel Cells.

Performance Improvement of MFCs by Treatment of Carbon Cloth Anode with Ultrasonic or Spent Anolyte

Anode Modification with Formic Acid: A Simple and Effective Method to Improve the Power Generation of Microbial Fuel Cells

Comparison of Different Chemical Treatments of Brush and Flat Carbon Electrodes to Improve Performance of Microbial Fuel Cells

Improved Performance of Microbial Fuel Cells Enriched with Natural Microbial Inocula and Treated by Electrical Current

Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration.

Enhanced Power Production of Microbial Fuel Cells by Reducing the Oxygen and Nitrogen Functional Groups of Carbon Cloth Anode

The performance of microbial fuel cell with sodium alginate and super activated carbon composite gel modified anode

Application of Surface-modified Carbon Nanotubes Powder in Microbial Fuel Cell

Improving power output in microbial fuel cells with free-standing CoC x /Co@CC composite anodes

Investigating the effect of anode materials on the performance and microbial community in an integrated chamber-free microbial fuel cell

Combined Carbon Mesh and Small Graphite Fiber Brush Anodes to Enhance and Stabilize Power Generation in Microbial Fuel Cells Treating Domestic Wastewater

Effects of Anode Materials on Electricity Generation and Organic Wastewater Treatment of 6 L Microbial Fuel Cells

Enhancing Bioelectricity Generation from Wastewater in Microbial Fuel Cells Using Carbon Nanomaterials

Ion Exchange Membrane Cathodes For Scalable Microbial Fuel Cells

A Carbon-Cloth Anode Electroplated with Iron Nanostructure for Microbial Fuel Cell Operated with Real Wastewater

Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells.

Enhancing extracellular electron transfer through selective enrichment of Geobacter with Fe@CN-modified carbon-based anode in microbial fuel cells

Improving the Power Generation of Microbial Fuel Cells by Modifying the Anode with Single-Wall Carbon Nanohorns.

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.