Abstract:A larger (6.1 L) MFC stack made in a scalable configuration was constructed with four anode modules and three (two-sided) cathode modules, and tested at a wastewater treatment plant for performance in terms of chemical oxygen demand (COD) removal and power generation. Domestic wastewater was fed either in parallel (raw wastewater to each individual anode module) or series (sequentially through the chambers), with the flow direction either alternated every one or two days or kept fixed in a single direction over time. The largest impact on performance was the wastewater COD concentration, which greatly impacted power production, but did not affect the percentage of COD removal. With higher COD concentrations (similar to 500 mg L-1) and alternating flow conditions, power generation was primarily limited by the cathode specific area. In alternating flow operation, anode modules connected to two cathodes produced an average maximum power density of 6.0 +/- 0.4 W m(-3), which was 1.9 +/- 0.2 times that obtained for anodes connected to a single cathode. In fixed flow operation, a large subsequent decrease in COD influent concentration greatly reduced power production independent of reactor operation in parallel or serial flow modes. Anode modules connected to two cathodes did not consistently produce more power than the anodes connected to a single cathode, indicating power production became limited by restricted anode performance at low CODs. Cyclic voltammetry and electrochemical impedance spectroscopy data supported restricted anode performance with low COD. These results demonstrate that maintaining power production of MFC stack requires higher influent and effluent COD concentrations. However, overall performance of the MFC in terms of COD removal was not affected by operational modes. (C) 2016 Elsevier Ltd. All rights reserved.

Effects of Different Oxytetracycline Acclimation Strategies on Microbial Community Composition and Functional Characteristics of MFC

Dynamic evolution of electrochemical and biological features in microbial fuel cells upon chronic exposure to increasing oxytetracycline dosage

The Changes of Bacterial Communities and Antibiotic Resistance Genes in Microbial Fuel Cells During Long-Term Oxytetracycline Processing

Oxytetracycline Wastewater Treatment in Microbial Fuel Cells and the Analysis of Microbial Communities

Microbial Fuel Cells: the Effects of Configurations, Electrolyte Solutions, and Electrode Materials on Power Generation

[Effects of Exoelectrogens and Electron Acceptors on the Performance of Microbial Fuel Cells].

Enhanced Electricity Generation of a 1.2-L Microbial Fuel Cell with Acclimation of Applied Voltage

Effect of Electro-Oil Acclimation of an Indigenous Strain on the Performance of Sediment Microbial Fuel Cells (SMFC)

Biodegradation of Oxytetracycline and Electricity Generation in Microbial Fuel Cell with in Situ Dual Graphene Modified Bioelectrode.

Tetracycline Inhibition and Transformation in Microbial Fuel Cell Systems: Performance, Transformation Intermediates, and Microbial Community Structure.

Bacterial Community Shift and Antibiotics Resistant Genes Analysis in Response to Biodegradation of Oxytetracycline in Dual Graphene Modified Bioelectrode Microbial Fuel Cell.

Effect of Anodes Decoration with Metal and Metal Oxides Nanoparticles on Pharmaceutically Active Compounds Removal and Power Generation in Microbial Fuel Cells

Anaerobic/aerobic Conditions and Biostimulation for Enhanced Chlorophenols Degradation in Biocathode Microbial Fuel Cells.

Effect of In-Situ Immobilized Anode on Performance of the Microbial Fuel Cell with High Concentration of Sodium Acetate

Simultaneous enhancement of power generation and chlorophenol degradation in nonmodified microbial fuel cells using an electroactive biofilm carbon felt anode

Effect of Substrate Conversion on Performance of Microbial Fuel Cells and Anodic Microbial Communities.

Effects of bio- and abio-factors on electricity production in a mediatorless microbial fuel cell

The Effect of Fl Ow Modes and Electrode Combinations on the Performance of a Multiple Module Microbial Fuel Cell Installed at Wastewater Treatment Plant

External circuit loading mode regulates anode biofilm electrochemistry and pollutants removal in microbial fuel cells

Development of Microbial Community Within the Cathodic Biofilm of Single-Chamber Air-Cathode Microbial Fuel Cell.

Comparison of anodic microbial communities in parallel-operated microbial fuel cells