Abstract:This study presents a novel method for independently calculating organic matter (OM) removal and electricity generation in a microbial fuel cell (MFC) treating sewage. This methodology used OM concentration as the exclusive variable for input, facilitating the prediction of electricity generation with variable Coulombic efficiency. The employed MFC, of tubular design, incorporates an air core surrounded by a carbon-based cathode, an anion exchange membrane , nonwoven graphite fabric, and encircled by twelve carbon brush anodes. This setup successfully reduced chemical oxygen demand (COD) from 180 to 50 mg L −1 and biological oxygen demand (BOD) from 84 to 15 mg L −1 within a 35 h hydraulic retention time (HRT). The resulting effluent BOD satisfies Japanese wastewater treatment standards. In the early HRT phase, the MFC exhibited rapid OM reduction, followed by a stabilization of OM concentration. Despite varying HRTs and the sustained OM levels at prolonged HRTs, the MFC consistently generated 0.29 ± 0.14 A m −2 . This apparent contradiction prompted the consideration of additional OM sources from the anode biomass ( C b ). Calculating electricity production based on OM concentration rather than OM degradation was achieved by assessing anode resistance ( R A n ) across different levels of OM supplementation, employing the Butler–Volmer equation. This approach, incorporating considerations for C b and R A n , accurately reproduced MFC performance. It was observed that OM supplementation from C b constituted 50% at 11 h HRT and escalated to 90% at 27 h HRT. Further analysis, including 16S rRNA gene-based microbial community profiling, indicated that higher cathode resistance ( R Cat ) at 1.0 Ω m 2 , compared to a minimum R A n of 0.10 Ω m 2 , favored methanogenesis over electrogenesis on the carbon brushes. This finding underscores the importance of reducing R Cat and minimizing electrode distance, coupled with enhancing the specific surface area of both electrodes, as crucial factors for the advancement of MFC technology.

Study on performance and mechanisms of anaerobic oxidation of methane-microbial fuel cells (AOM-MFCs) with acetate-acclimatizing or formate-acclimatizing electroactive culture

Influence and Mechanism of Dissolved Oxygen on the Performance of Ammonia-Oxidation Microbial Fuel Cell

Acetate and electricity generation from methane in conductive fiber membrane- microbial fuel cells

Converting methane into electricity and higher-value chemicals at scale via anaerobic microbial fuel cells

Anaerobic oxidation of methane coupled with extracellular electron transfer to electrodes

Syntrophic interactions improve power production in formic acid fed MFCs operated with set anode potentials or fixed resistances

A new integrated single-chamber air-cathode microbial fuel cell - Anaerobic membrane bioreactor system for improving methane production and membrane fouling mitigation

Coupling process and mechanism of methanol oxidation and nitrate reduction in an anodic denitrification microbial fuel cell (AD-MFC)

Simultaneous Anaerobic Ammonium Oxidation and Electricity Generation in Microbial Fuel Cell: Performance and Electrochemical Characteristics

Assessing the Performance of Continuous-Flow Microbial Fuel Cells and Membrane Electrode Assembly with Electrodeposited Mn Oxide Catalyst

A new strategy for improving MFC power output by shared electrode MFC–MEC coupling

An Integrated Aerobic-Anaerobic Strategy for Performance Enhancement of Pseudomonas Aeruginosa-Inoculated Microbial Fuel Cell.

Microbial Electrochemistry Enhanced Electron Transfer in Lactic Acid Anaerobic Digestion for Methane Production

Generation of electrical energy in a microbial fuel cell coupling acetate oxidation to Fe3+ reduction and isolation of the involved bacteria

Microbial fingerprints of methanation in a hybrid electric-biological anaerobic digestion

A Membrane Electrode Assembly Typed Microbial Fuel Cell for Electricity Generation

A Large Cathode Surface Area Promotes Electromethanogenesis in a Microbial Electrolysis Cell

Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration.

Anode biomass rather than soluble organic matter is fuel for electricity production in microbial fuel cell at longer hydraulic retention time

Investigating the effect of anode materials on the performance and microbial community in an integrated chamber-free microbial fuel cell

Influences of initial pH on performance and anodic microbes of fed-batch microbial fuel cells