Abstract:Electrostatic phenomena widely exist in various olefin polymerization fluidized bed reactors, due to the continuous collision and friction of dielectric particles and the low-humidity reaction environment. The measurement of particle charge density is essential for monitoring and controlling the electrostatic level as well as probing the hydrodynamic characteristics in a fluidized bed. In this work, a non-intrusive online measurement system, employing ring-shaped sensing electrodes and a pressure transducer, is designed and implemented on a fluidized bed test rig. A modified model considering the influence of spatial sensitivity of the electrodes is proposed to predict the particle charge density in the fluidized bed, based on the measured induced electrostatic current and pressure drop signals. Experimental results have demonstrated that the induced electrostatic current and pressure drop signals show remarkable similarity, with the two PSDs both mainly distributed within 0.5–5Hz, which indicates close relationship between the two signals. The predicted particle charge density increases with the superficial gas velocity and decreases with the injection content of liquid anti-static agent (LAA), showing the same variation tendencies as that measured through a Faraday cup. When the electrode width is 20mm, the mean absolute relative errors for the direct method, area method and envelope method are 12.7%, 14.7% and 13.5%, respectively, indicating that the direct method is the most reliable signal processing approach proposed in this work.

Detection of Agglomeration in Gas-Phase Polymerization Fluidized-Bed by Using Sound Wave Technique

Agglomeration Detection by Acoustic Emission (AE) Sensors in Fluidized Beds

From Noise to Information: a New Technology of Olefin Polymerization Fluidized Bed Reactor Based on Acoustic Emission

Multi-scale analysis of acoustic emissions and malfunction diagnosis in gas-solid fluidized bed

Wall Sheeting Diagnosis in Fluidized Beds Based on Chaos Analysis of Acoustic Emission Signals

Characterization of Particle Fluidization Pattern in a Gas Solid Fluidized Bed Based on Acoustic Emission (AE) Measurement

Detection of polypropylene agglomeration in hsbr based on the analysis of acoustic emission signal by auto-regression model

Acoustic emission and agglomeration location in gas-solid fluidized bed

Determination of Particle Size Distribution by Multi-Scale Analysis of Acoustic Emission Signals in Gas-Solid Fluidized Bed

Detection of Particle Mass Flowrate in High-Speed Fluidization Based on Acoustic Emission Technology

Measurement of the Fluidized Velocity in Gas-Solid Fluidized Beds Based on AE Signal Analysis by Wavelet Packet Transform

Investigating Agglomeration Behaviors in High Temperature Gas–Solid Fluidized Beds with Liquid Injection

Important Mesoscale Phenomena in Gas Phase Fluidized Bed Ethylene Polymerization

Malfunction Diagnosis in Horizontal Stirred Bed Reactors Based on Attractor Comparison Analysis of Acoustic Emission Signals

Measurement of Bed Level in Gas-Solid Fluidized Bed by Ultrasonic Technique

Measurement of Flow Pattern and Bed Level of Gas-solid Fluidized Bed in Borstar Process by Acoustic Emission Technique

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Measurement of Flow Pattern in Fluidized Bed Based on Acoustic Emission and Complexity Analysis

Online Measurement of Particle Charge Density in A Gas-Solid Bubbling Fluidized Bed Through Electrostatic and Pressure Sensing

Bubble Characterization in the Gas-Solid Fluidized Bed Using an Intrusive Acoustic Emission Sensor Array

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions