Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Malfunction Diagnosis in Horizontal Stirred Bed Reactors Based on Attractor Comparison Analysis of Acoustic Emission Signals

Agglomeration detection in horizontal stirred bed reactor based on autoregression model by acoustic emission signals

Detection of polypropylene agglomeration in hsbr based on the analysis of acoustic emission signal by auto-regression model

Agglomeration Detection Based on Attractor Comparison in Horizontal Stirred Bed Reactors by Acoustic Emission Sensors

Agglomeration Detection by Acoustic Emission (AE) Sensors in Fluidized Beds

From Noise to Information: a New Technology of Olefin Polymerization Fluidized Bed Reactor Based on Acoustic Emission

Determination of Acclivitous Angle of Bed Level in Horizontal Stirred Bed Reactor for Polypropylene by Acoustic Emission Measurement

R/S Analysis of Acoustic Emission and Measurement of Slurry Mass Concentration in Loop Reactor

Wall Sheeting Diagnosis in Fluidized Beds Based on Chaos Analysis of Acoustic Emission Signals

Measurement of Critical Suspension Speed in Stirred Tank Using Acoustic Emission Technique Based on Hilbert-Huang Transform

Multi-scale analysis of acoustic emissions and malfunction diagnosis in gas-solid fluidized bed

Detection of Particle Mass Flowrate in High-Speed Fluidization Based on Acoustic Emission Technology

Fault Detection Based on Acoustic Emission–Early Agglomeration Recognition System in Fluidized Bed Reactor

Measurement of Slurry Suspension Height in Stirred Tank by Multi-Scale Analysis of Acoustic Emission Technology

A New Approach for Online Monitoring of Additive Manufacturing Based on Acoustic Emission

Characterization of Particle Fluidization Pattern in a Gas Solid Fluidized Bed Based on Acoustic Emission (AE) Measurement

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Determination of Particle Size Distribution by Multi-Scale Analysis of Acoustic Emission Signals in Gas-Solid Fluidized Bed

Measurement of Flow Pattern and Bed Level of Gas-solid Fluidized Bed in Borstar Process by Acoustic Emission Technique

Acoustic Emission Detection of Particle Movement in A Cross-Flow Moving Bed

Detection of Liquid Atomization Status Using Acoustic Emission Method