Abstract:Building Services Engineering Research and Technology, Ahead of Print. Phase change radiant panels (PCRPs) with thermal storage can enhance the heat capacity of buildings, and reduce building energy consumption. In this paper, a composite phase change material (CPCM) was prepared by paraffin wax-lauric acid/expanded graphite (PW-LA/EG) and applied to radiant panels. This CPCM exhibits a broad temperature range for phase change (10°C - 40°C), with EG at the optimal mass fraction of 14% and PW-LA at the optimal ratio of 1:1. It has a moderate latent heat capacity, a thermal conductivity of 1.692 W/mK, and excellent thermal stability. Furthermore, the simulations were performed in this paper, and the year-round comfort, thermal storage/release characteristics, and the influencing factors of PCRPs were evaluated by TRNSYS software. The results show that the PCRP can enhance indoor comfort throughout the year and exhibit excellent thermal storage and release properties. The analysis of influencing factors indicates that the thickness of the PCM has a small impact on the PCRP. It is recommended that a radiant panel coverage rate of at least 70% and a water supply time of 10 h in summer and 8 h in winter. These optimized parameter values can offer valuable guidance for the design and practical application of PCRPs.Practical applicationPhase change materials have been widely studied as materials used for thermal energy storage. The radiant panel with phase change materials can enhance the heat capacity of buildings, and reduce building energy consumption. This paper proposes a phase change radiant panel that can be used to solve the problem of year-round energy storage of radiant panels in hot summer and cold winter areas. Furthermore, this paper uses TRNSYS software to study the performance of the phase change radiant panels and offers valuable guidance for the design and practical application of PCM radiant panels.

Thermal performance of radiant heating and cooling ceiling with two kinds of phase change materials for thermal energy storage

Simulation Research on the Thermal Performance of the Cooling Ceiling Embedded with Phase Change Material for Energy Storage

Simulation Research on Thermal Performance of Radiant Cooling Ceiling with Phase Change Material for Thermal Storage

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Research on the thermal performance of the room with integrated water tube floor heating system using shape-stabilized phase change materials for energy storage

Thermal performance of phase change material energy storage floor for active solar water-heating system

Numerical study of thermal performance of phase change material energy storage floor in solar water heating system

Experimental Study on the Thermal Performance of the Shape-Stabilized Phase Change Material Floor Used in Passive Solar Buildings

Model and simulation on thermal performance of shape-stabilized phase change material floor

Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index

Preparation and performance study of a novel radiant panel for thermal and cooling storage with phase change materials

Preparation, Thermal Performance, and Application of Shape-stabilized PCM in Energy Efficient Buildings

Experimental Research on Thermal Performance of Shape-Stabilized Phase Change Material Floor

Parametric Analysis of the Phase Change Material Wall Combining with Micro-Channel Heat Pipe and Sky Radiative Cooling Technology

Improving thermal performance of a passive ventilation and cooling system by integrating a phase-change material: Dynamic characteristics and parametric examinations

Experimental and Numerical Performance Analysis of an Active Cooling Wall Module Equipped with Micro-encapsulated Phase Change Material

Thermal Analysis of a Direct-Gain Room with Shape-Stabilized PCM Plates

A review of radiant heating and cooling systems incorporating phase change materials