Abstract:A series of narrow band-gap conjugated copolymers (PFO-DDQ) derived from 9,9-dioctylfluorene (DOF) and 2,3-dimethyl-5,8-dithien-2-yl-quinoxalines (DDQ) is prepared by the palladium-catalyzed Suzuki coupling reaction with the molar feed ratio of DDQ at around 1%, 5%, 15%, 30% and 50%, respectively. The obtained polymers are readily soluble in common organic solvents. The solutions and the thin solid films of the copolymers absorb light from 300–590 nm with two absorbance peaks at around 380 and 490 nm. The intensity of 490 nm peak increases with the increasing DDQ content in the polymers. Efficient energy transfer due to exciton trapping on narrow-band-gap DDQ sites has been observed. The PL emission consists exclusively of DDQ unit emission at around 591–643 nm depending on the DDQ content in solid film. The EL emission peaks are red-shifted from 580 nm for PFO-DDQ1 to 635 nm for PFO-DDQ50. The highest external quantum efficiency achieved with the device configuration ITO/PEDOT/PVK/PFO-DDQ15/Ba/Al is 1.33% with a luminous efficiency 1.54 cd/A. Bulk heterojunction photovoltaic cells fabricated from composite films of PFO-DDQ30 copolymer and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) as electron donor and electron acceptor, respectively in device configuration: ITO/PEDOT:PSS/PFODDQ30: PCBM/PFPNBr/Al shows power conversion efficiencies of 1.18% with open-circuit voltage (V oc) of 0.90 V and short-circuit current density (J sc) of 2.66 mA/cm2 under an AM1.5 solar simulator (100 mW/cm2). The photocurrent response wavelengths of the PVCs based on PFO-DDQ30/PCBM blends covers 300–700 nm. This indicates that these kinds of low band-gap polymers are promising candidates for polymeric solar cells and red light-emitting diodes.

High-Efficiency Saturated Red Bilayer Light-Emitting Diodes: Comparative Studies with Devices from Blend of the Same Light-Emitting Polymers

Utilization of Water/Alcohol-Soluble Polyelectrolyte As an Electron Injection Layer for Fabrication of High-Efficiency Multilayer Saturated Red-Phosphorescence Polymer Light-Emitting Diodes by Solution Processing

Efficient Red Phosphorescence Polymer Light-Emitting Diodes with Dual Function Polymer

High-Efficiency Polymer Light-Emitting Diodes With Stable Saturated Red Emission Based On Blends Of Dioctylfluorene-Benzothiadiazole-Dithienylbenzothiadiazole Terpolymers And Poly[2-Methoxy,5-(2-Ethylhexoxy)-1,4-Phenylene Vinylene]

Improved Device Efficiency and Color Purity: Spectral Redshift and Line Narrowing for Poly [2-Methoxy,5-(2-ethylhexyloxy)-1,4-phenylenevinylene] Via Blending with Phenyl-Substituted Poly [P-Phenylene Vinylene] Derivatives

High-Efficiency Red Light-Emitting Diodes Based on Polyfluorene Copolymers with Extremely Low Content of 4,7-Di-2-thienyl-2,1,3-benzothiadiazole-comparative Studies of Intrachain and Interchain Interaction

Saturated Red Light Emitting Polymers and Devices

Improved Saturated Red Emission In Polymer Light Emitting Diode

High Efficiency Electrophosphorescent Red Organic Light-Emitting Devices with Double-Emission Layers

Stability Study of Saturated Red Polymer Light-Emitting Diodes

Narrow Emission from Polyimide Light-Emitting Diodes

Electroluminescence and Photoluminescence of Dioctylfluorene and 4,7-Dithien-2-yl-2,1,3-benzothiadiazole Copolymers

High‐Efficiency Polymer Light‐Emitting Diodes with Stable Saturated Red Emission: Use of Carbazole‐Based Copolymer Blends in a Poly(p‐phenylenevinylene) Derivative

High-efficiency Red Electroluminescence from Europium Complex Containing a Neutral Dipyrido(3,2-A:2′,3′-C)phenazine Ligand in PLEDs

Performance of Polymer Light-Emitting Diodes with Saturated Red-Emitting Poly(fluorine-Co-4,7-dithien-2-yl-2,1,3-benzothiadiazole-carbazole or Triphenylamine)

Improved Efficiency of Single‐Layer Polymer Light‐Emitting Devices with Poly(vinylcarbazole) Doubly Doped with Phosphorescent and Fluorescent Dyes As the Emitting Layer

Highly Efficient Non-Doped Single-Layer Blue Organic Light-Emitting Diodes Based on Light-Emitting Conjugated Polymers Containing Trifluoren-2-ylamine and Dibenzothiophene-S,s-dioxide

Enhanced Electroluminescent Efficiency Based on Functionalized Europium Complexes in Polymer Light-Emitting Diodes

FLUORENE-BASED COPOLYMERS FOR RED LIGHT-EMITTING DIODES AND BULK HETEROJUNCTION PHOTOVOLTAIC CELL

Efficient polymer red light-emitting diodes with cathode interface modification layer based on phosphonate polyfluorene

Efficient Red Light-Emitting Diodes Based on Novel Europium Complexes in Poly(9,9-Dioctylfluorene) Host