Abstract:In the present paper electroluminescence spectrum and Raman spectrum were used to study electro-degradation of polymer light emitting devices (PLEDs) of PFO-BT15, a new and high-efficiency emitting polymer synthesized by the institute of polymer optoelectronic material & devices (IPOM) in South China University of Technology. The PLEDs with a configuration of ITO glass/PEDOT(120 nm)/PFO-BT15(80 nm)/Ba(4 nm)/Al(200 nm) emitted green light at 550 nm when 5 V dc voltage was applied. Three of those devices were used to study the electro-degradation mechanism of PLEDs. Device A was deposited in vacuum box in dark room to keep sample fresh; Device B was first lighted with current of 1 mA x 0.25 cm(-2) for 200 minutes, then with current of 5 mA x 0.25 cm(-2) for 60 minutes, finally with current of 10 mA x 0.25 cm(-2) for 40 minutes; Device C was lighted with current of 20 mA x 0.25 cm(-2) until the electroluminescence failure. Our experimental results indicate that the degradation speeds highly depend on the current through the devices. The stressed devices show the decrease in electroluminescence efficiency. However, the luminescence spectrum of the stressed device did not change compared with the fresh device, which suggest that the structure of the luminescent polymer did not change with the electro-stress. Raman spectrum was employed to probe the structure changes of the materials used in the device. We found that the PEDOT Raman peak disappeared andthe PFO-BT15 Raman peak still existed in electro-stress device. The results confirmed that it was the breakage of the PEDOT layer instead of degradation of emitting polymer, that led to the final failure of the PLEDs device. This work gives some valuable information for the design and development of highly stable organic light-emitting device.

Stability Study of Saturated Red Polymer Light-Emitting Diodes

Utilization of Water/Alcohol-Soluble Polyelectrolyte As an Electron Injection Layer for Fabrication of High-Efficiency Multilayer Saturated Red-Phosphorescence Polymer Light-Emitting Diodes by Solution Processing

Efficient Red Phosphorescence Polymer Light-Emitting Diodes with Dual Function Polymer

Saturated Red Light Emitting Polymers and Devices

High-Efficiency Saturated Red Bilayer Light-Emitting Diodes: Comparative Studies with Devices from Blend of the Same Light-Emitting Polymers

High-Efficiency Polymer Light-Emitting Diodes With Stable Saturated Red Emission Based On Blends Of Dioctylfluorene-Benzothiadiazole-Dithienylbenzothiadiazole Terpolymers And Poly[2-Methoxy,5-(2-Ethylhexoxy)-1,4-Phenylene Vinylene]

Performance of Polymer Light-Emitting Diodes with Saturated Red-Emitting Poly(fluorine-Co-4,7-dithien-2-yl-2,1,3-benzothiadiazole-carbazole or Triphenylamine)

High‐Efficiency Polymer Light‐Emitting Diodes with Stable Saturated Red Emission: Use of Carbazole‐Based Copolymer Blends in a Poly(p‐phenylenevinylene) Derivative

A stable red emission in polymer light-emitting diodes based on phenothiazine derivative

Efficient All-Solution-processing Deep-Red Polymer Light-Emitting Diodes (pleds) Based on [Ir(dpqx)2(n^o)]-Heteroleptic Complexes with Asymmetric N^O-ancillary Π-Donors

Improved Saturated Red Emission In Polymer Light Emitting Diode

Efficient, saturated red electroluminescent devices with modified pyran-containing emitters

Red Polymer Light-Emitting Devices Based on an Oxadiazole-Functionalized Europium(Iii) Complex

Performance Improvement of Polymer Light-Emitting Diodes Based on Fluorene Copolymer with Cesium Fluoride/aluminum Cathode

[Study on Electro-Degradation of New Conjugated Polymer PFO-BT15 Light Emitting Diodes].

Red Light-Emitting Diodes Based on PFO-BSeD

Synthesis And Electroluminescent Properties Of High-Efficiency Saturated Red Emitter Based On Copolymers From Fluorene And 4,7-Di(4-Hexylthien-2-Yl)-2,1,3-Benzothiadiazole

Synthesis and Electroluminescent Properties of a Phenothiazine‐based Polymer for Nondoped Polymer Light‐emitting Diodes with a Stable Orange‐red Emission

Study on the Degradation of PLEDs by In-Situ Micro-Raman Spectroscopy

Degradation Mechanism Of Phosphorescent-Dye-Doped Polymer Light-Emitting Diodes

Color-stable Deep Red-Emitting OLEDs Based on a Soluble Terpolymer Containing Fluorene, Thiophene and Benzothiadiazole Units