Abstract:A series of narrow band-gap conjugated copolymers (PFO-DDQ) derived from 9,9-dioctylfluorene (DOF) and 2,3-dimethyl-5,8-dithien-2-yl-quinoxalines (DDQ) is prepared by the palladium-catalyzed Suzuki coupling reaction with the molar feed ratio of DDQ at around 1%, 5%, 15%, 30% and 50%, respectively. The obtained polymers are readily soluble in common organic solvents. The solutions and the thin solid films of the copolymers absorb light from 300–590 nm with two absorbance peaks at around 380 and 490 nm. The intensity of 490 nm peak increases with the increasing DDQ content in the polymers. Efficient energy transfer due to exciton trapping on narrow-band-gap DDQ sites has been observed. The PL emission consists exclusively of DDQ unit emission at around 591–643 nm depending on the DDQ content in solid film. The EL emission peaks are red-shifted from 580 nm for PFO-DDQ1 to 635 nm for PFO-DDQ50. The highest external quantum efficiency achieved with the device configuration ITO/PEDOT/PVK/PFO-DDQ15/Ba/Al is 1.33% with a luminous efficiency 1.54 cd/A. Bulk heterojunction photovoltaic cells fabricated from composite films of PFO-DDQ30 copolymer and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) as electron donor and electron acceptor, respectively in device configuration: ITO/PEDOT:PSS/PFODDQ30: PCBM/PFPNBr/Al shows power conversion efficiencies of 1.18% with open-circuit voltage (V oc) of 0.90 V and short-circuit current density (J sc) of 2.66 mA/cm2 under an AM1.5 solar simulator (100 mW/cm2). The photocurrent response wavelengths of the PVCs based on PFO-DDQ30/PCBM blends covers 300–700 nm. This indicates that these kinds of low band-gap polymers are promising candidates for polymeric solar cells and red light-emitting diodes.

High-Efficiency Red Light-Emitting Diodes Based on Polyfluorene Copolymers with Extremely Low Content of 4,7-Di-2-thienyl-2,1,3-benzothiadiazole-comparative Studies of Intrachain and Interchain Interaction

Application of Heteroleptic Iridium Complexes with Fluorenyl-Modified 1-Phenylisoquinoline Ligand for High-Efficiency Red Polymer Light-Emitting Devices

Utilization of Water/Alcohol-Soluble Polyelectrolyte As an Electron Injection Layer for Fabrication of High-Efficiency Multilayer Saturated Red-Phosphorescence Polymer Light-Emitting Diodes by Solution Processing

Synthesis And Electroluminescent Properties Of High-Efficiency Saturated Red Emitter Based On Copolymers From Fluorene And 4,7-Di(4-Hexylthien-2-Yl)-2,1,3-Benzothiadiazole

Saturated Red Light Emitting Polymers and Devices

FLUORENE-BASED COPOLYMERS FOR RED LIGHT-EMITTING DIODES AND BULK HETEROJUNCTION PHOTOVOLTAIC CELL

High-Efficiency Saturated Red Bilayer Light-Emitting Diodes: Comparative Studies with Devices from Blend of the Same Light-Emitting Polymers

Novel Red-Emitting Fluorene-Based Copolymers

High-Efficiency Polymer Light-Emitting Diodes With Stable Saturated Red Emission Based On Blends Of Dioctylfluorene-Benzothiadiazole-Dithienylbenzothiadiazole Terpolymers And Poly[2-Methoxy,5-(2-Ethylhexoxy)-1,4-Phenylene Vinylene]

Efficient Red Light-Emitting Diodes Based on Novel Europium Complexes in Poly(9,9-Dioctylfluorene) Host

P-117: Efficiently Saturated Red Emission Polymers and Matrix Display

Electroluminescence and Photoluminescence of Dioctylfluorene and 4,7-Dithien-2-yl-2,1,3-benzothiadiazole Copolymers

Performance of Polymer Light-Emitting Diodes with Saturated Red-Emitting Poly(fluorine-Co-4,7-dithien-2-yl-2,1,3-benzothiadiazole-carbazole or Triphenylamine)

Comparative Study on Polymer Light-Emitting Devices Based on Blends of Polyfluorene and 4,7-Di-2-thienyl-2,1,3-benzothiadiazole with Devices Based on Copolymer of the Same Composition.

A dithienyl benzotriazole-based polyfluorene: Synthesis and applications in polymer solar cells and red light-emitting diodes

Synthesis, Photophysics, and Electroluminescence of High-Efficiency Saturated Red Light-Emitting Polyfluorene-Based Polyelectrolytes and Their Neutral Precursors

Performance Improvement of Polymer Light-Emitting Diodes Based on Fluorene Copolymer with Cesium Fluoride/aluminum Cathode

Synthesis and Characterization of Novel Red-Emitting Copolymers Containing Fluorene, Diketopyrrolopyrrole, and Phenothiazine Units

Novel Random Low‐Band‐Gap Fluorene‐Based Copolymers for Deep Red/Near Infrared Light‐Emitting Diodes and Bulk Heterojunction Photovoltaic Cells

Optoelectronic Properties of Fluorene-Co-4,7-difuran-2,1,3-benzothiadiazole Copolymers

Efficient White-Light-emitting Diodes Based on Polyfluorene Doped with Fluorescent Chromophores