Abstract:A high soluble and stable epsilon-Zn(OH)(2) precursor is synthesized at below room temperature to efficiently prepare ZnO whiskers. The experimental results indicate that the formation of ZnO whiskers is carried out mainly via two steps: the formation of ZnO seeds from epsilon-Zn(OH)(2) via the in situ solid conversion, and the following growth of whiskers via dissolution-precipitation route. The decrease of temperature from 25 to 5 degree celsius promotes the formation of epsilon-Zn(OH)(2) with higher solubility and stability, which balances the conversion and dissolution rates of precursor. The Rietveld refinement, DFT calculations and MD simulations reveal that the primary reason for these characteristics is the expansion of e-Zn(OH)(2) lattice due to temperature, causing difficulties in the dehydration of adjacent OH. Simultaneously, the larger specific surface area favors the dissolution of epsilon-Zn(OH)(2). Based on this precursor, well-dispersed ZnO whiskers with 9.82 mu m in length, 242.38 nm in diameter, and an average aspect ratio of 41 are successfully synthesized through a SDSN-assisted hydrothermal process at 80 degree celsius. The process has an extremely high solid content of 2.5% (mass ratio of ZnO to solution) and an overall yield of 92%, which offers a new approach for the scaled synthesis of high aspect ratio ZnO whiskers by liquid-phase method.

Zinc Oxide Hexagram Whiskers

Microwave-Assisted Rapid Synthesis Of Zno Hexagonal Quasi-Hourglasses

Preparation of ZrO 2 whiskers through high pressure and high temperature method

Rod-Like Zinc Oxide Constructed by Nanoparticles: Synthesis, Characterization and Optical Properties

Structure-Direct Assembly of Hexagonal Pencil-Like Zno Group Whiskers

An “edge to Edge” Jigsaw-Puzzle Two-Dimensional Vapor-Phase Transport Growth of High-Quality Large-Area Wurtzite-Type ZnO (0001) Nanohexagons

Evaporation Growth of Multipod ZnO Whiskers Assisted by a Cu2+ Etching Technique

Preparation of Zno Cluster and Rod-Like Whiskers Through Hydrothermal Methods

Preparation of Well-Aligned ZnO Whiskers on Glass Substrate by Atmospheric MOCVD

Synthesis of ZnO Whiskers Via Hydrothermal Decomposition Route

Zinc Oxide Nanostructure Fabricated In Anodic Alumina Oxide Template By Sol-Gel Method

Synthesis and Characterization of Radiate Mgo Whiskers

Preparation and Growth Mechanism of Molybdenum Trioxide Whisker

Growth of Hexagonal Zno Nanowires and Nanowhiskers

Fabrication of Hierarchical Zinc Oxide Nanostructures Through Multistage Gas-Phase Reaction

A Study on the In-Situ Growth of Highly Oriented Zno Whisker

Zinc Oxide Microtubes Prepared by Optical Thermal Evaporation

In-Situ Growth of ZnO Whiskers on Ti2ZnC MAX Phases

Formation of Zinc Oxide Micro-Disks Via Layer-By-Layer Growth and Growth Mechanism of Zno Nanostructures

Fabrication and characterization of hexagonally patterned quasi-1D ZnO nanowire arrays

Synthesis and Mechanism of 1D ZnO Based on Alkaline Dissolution‐Conversion Strategy of High Stable and Soluble Ɛ‐zn(oh)2