Abstract:Journal of Intelligent Material Systems and Structures, Ahead of Print. In order to meet the requirements of high frequency, high precision, and micro-scale dispensing in the field of microelectronics packaging, a piezoelectric jetting dispensing valve based on two-stage displacement amplifying mechanism was proposed. First, the overall structure and working principle of the proposed piezoelectric jetting valve were described. The displacement amplifying mechanism was designed, and the mathematical relationship between the output displacement and the structural parameters was established. In addition, the performance and the structural size of the displacement amplifying mechanism were analyzed and optimized by using the finite element analysis software. The influences of driving pressure, glue viscosity, needle displacement, and other parameters on droplet diameter and jetting velocity in the process of dispensing were simulated and analyzed. In order to obtain the optimal nozzle structure, the changing curves of glue flowing velocity with different nozzle seal forms, nozzle cone angles, and outlet inner diameters were compared and analyzed. Finally, the prototype of the piezoelectric jetting dispensing valve was machined, and experimental study was performed. The influence laws of driving pressure, glue viscosity, driving voltage, and other parameters on the diameter of droplet were explored. The performance of the prototype was evaluated from three aspects of dispensing frequency, consistency, and minimum dispensing droplet diameter. Results show that the highest dispensing frequency is 230 Hz, the deviation of dispensing consistency is ±8.77%, and the minimum dispensing droplet diameter is 0.54 mm. The experimental results verify the high frequency, consistency, and micro-scale dispensing performance of the piezoelectric jetting dispensing valve based on the displacement amplifying mechanism, which provides a reference for the research of piezoelectric high-frequency jetting dispensing.

The Fabrication and Experimental Research on Piezoelectric Array Microjet

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

Piezoelectrically Actuated Array Microjet for Biomedical Purpose

MEMS-based piezoelectric array microjet

Micromachined array microjet for inhalation drug therapy

Important Theory of Array Microjet Based on MEMS

A Piezoelectric Micropumping Device

The Characteristics of a Piezoelectrically Actuated Micro Jet

Design of Piezoelectric Micro-Droplet Injector

The Design and Evaluation of a High-Speed Jet Dispenser Driven by Single Piezoelectric Stack

Design and Fabrication of A Piezoelectric Bend Mode Drop-On-Demand Inkjet Printhead with Interchangeable Nozzle

Droplet Jetting of Piezoelectric Printhead and Corresponding Effect Factors

The Effect of Nozzle Layout on Droplet Ejection of a Piezo-Electrically Actuated Micro-Atomizer

Design and performance analysis of a piezoelectric jetting dispensing valve

Dynamic Analysis of Piezoelectric-Solid-Liquid Coupled System of Micro Nebulizer

Study of uniformity of atmospheric pressure plasma microjet array for maskless parallel micropatterned etching

Experimental research on surface acoustic wave microfluidic atomization for drug delivery

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Fluid-Solid Coupled Characteristics Of Piezo-Electrically Actuated Micro-Droplet Generator

Micro-Jet Pump for Micro-Fluidic Systems

Emulation and Experiment of Piezoeletric Micro Airflow Jet