Abstract:The present study describes the influence of the mutual effect of damage accumulation on the stress fields at the central crack tip in the plate subjected to uniaxial tension. The objective of the study is to analyze the cracked plate experiencing uniaxial loading under creep conditions using the CAE software SIMULIA ABAQUS taking into account the damage accumulation processes near the crack tip. Computations were performed by means of the user procedure UMAT (User material), which is based on the Bailey-Norton creep power law and the Kachanov — Rabotnov damage evolution equation describing the power-law damage accumulation processes. The analysis of the obtained results showed that in the creep and elasticity zones, in computations without taking into account the damage effect, there are asymptotics of stress fields that correspond to well-known analytical solutions of fracture mechanics (Hutchinson — Rice — Rosengren asymptotics for the creep zone, the asymptotics of linear fracture mechanics corresponding to the stress dependence. inversely proportional to the square root of the distance from the tip of the crack – for the zone of elastic behavior of the material. The presence of damage in the cracked specimen affected the asymptotic behavior of the crack tip fields. It is felt that the proposed procedure could pave the way for the analytical solution of the boundary value problem and allow us to determine the structure of the asymptotic solution of the problem. The finite element analysis clearly shows that the process of damage accumulation affects the change in the asymptotic behavior of the stress field in the vicinity of the crack tip and leads to a new asymptotic distribution of the stress tensor components. The proposed procedure can pave the way to an analytical solution of the boundary value problem and allow us to determine the structure of the asymptotic solution of the problem.

Creep Crack Interaction of High Temperature Structure with Multiple Cracks

Interaction between rectangular cracks embedded in infinite medium

The Interacting Effect for Collinear Cracks Near Mismatching Bimaterial Interface under Elastic Creep

Creep fracture parameter C* solutions for semi‐elliptical surface cracks in plates under tensile and bending loads

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Effects of nonproportional loading and residual stress on creep crack tip fields

Creep-Fatigue Crack Initiation Simulation of a Modified 12% Cr Steel Based on Grain Boundary Cavitation and Plastic Slip Accumulation

Characterization of Mismatch Constraint Effect for the Central Crack Plate under Biaxial Loading

Numerical Investigations on the Effects of T-stress in Creep Crack

Numerical Investigations on the Effects of T-Stress in Mode I Creep Crack

Modelling short crack growth under creep-fatigue interaction for different dwell times

Mismatch Constraint Effect for Bimaterial Interfacial Creep Crack

Influence of the process of damage accumulation on the asymptotic behavior of stress fields under creep conditions of a sample with a central crack

Novel semi-analytical model for solving the C *-integral of specimens with mode-I crack under various constraints

A Study on the Creeping Failure Related to Crack Inclination of Brittle Rocks

Numerical simulation of creep fracture evolution in fractured rock masses

Experimental and Theoretical Study on Crack Growth Using Rock-Like Resin Samples Containing Inherent Fissures and its Numerical Assessment

STRESS ANALYSIS OF MULTIPLE SURFACE CRACKS WITH INTERACTIONS

An interaction integral method coupled with special crack tip elements for evaluation of stress intensity factors

Stress corrosion and interaction behaviour of adjacent cracks in rock-like material under hydro-mechanical Coupling: An experimental and numerical study