Abstract:A numerical model is presented to reproduce the stress induced fracturing process of brittle rocks. Material heterogeneity at the zone level of the model is considered, and distinct initial microcrack lengths and orientations are also included. The rock material is prescribed with a Weibull distribution, and the microcrack lengths and orientations are defined by distinct distribution functions. Stress intensity factor approach is adopted to characterize the stress condition of the microcracks, and is used as a failure criterion for the zones of the model. The mechanical response of rock specimens is investigated on models under different external loading conditions. Obvious nonlinear characteristics before the peak strength can be observed in models under uniaxial compression. Consistency can be found between simulation results and lab test data. The influence of microcrack conditions and heterogeneity levels on the simulation result is also investigated. The macroscopic failure modes of models are studied with different distributions of initial microcracks, and correlations are found between the microcrack conditions and fracturing processes. Especially, scattered zones and obscure fracture patterns are produced in the model defined by exponential and uniform distribution, compared with clear shapes of macroscopic fractures observed in models defined by normal or lognormal distributions. The simulations also show that the differences in the mean value of microcrack orientations obeying certain distribution result in distinct macroscopic fracture patterns, from shear bands at lower mean orientations to tensile fractures at higher mean orientations. Typical fracture patterns observed in laboratory are successfully reproduced in the model, which demonstrates the capability of the model in reproducing faithful rock behaviors through prescribing specific microscopic characteristics.

A Study on the Creeping Failure Related to Crack Inclination of Brittle Rocks

A Micromechanical Method to Predict Macroscopic Behavior of Brittle Creep Failure in Rock

A Microcrack Growth-Based Constitutive Model for Evaluating Transient Shear Properties During Brittle Creep of Rocks

Investigation of Macroscopic Brittle Creep Failure Caused by Microcrack Growth Under Step Loading and Unloading in Rocks

Effects of Crack Inclination on Shear Failure of Brittle Geomaterials under Compression

A True Triaxial Compression-Induced Microcracking Model for Evaluating Short-Term Progressive and Long-Term Creep Failures of Brittle Rock

Macro-micro mechanical modelfor progressive and creep failure of brittle rock

A Microscopic Approach to Brittle Creep and Time-Dependent Fracturing of Rocks Based on Stress Corrosion Model

A Unified Analytical Method Calculating Brittle Rocks Deformation Induced by Crack Growth

An analytical micro-macro model of creep fracture driven by cyclic pore pressure in brittle rocks

Evaluation of Strength and Failure of Brittle Rock Containing Initial Cracks under Lithospheric Conditions

Estimation of Micromechanical Strength of Brittle Rocks under Compression

Study on the Mechanical Model of Macro-Mecro Creep under High Seepage Pressure in Brittle Rocks

Study on rock crack damage and confining pressure effects on shear fracture band

A Micro–macro Method for Evaluating Progressive and Direct Tensile Fractures in Brittle Rocks

A Micro-Macro Dynamic Compressive-Shear Fracture Model under Static Confining Pressure in Brittle Rocks

Micromechanics-based model study of shear properties of brittle rocks

Study on Microcrack Growth-Based Dynamic Compressive Mechanical Properties in Brittle Rocks

An Analytical Method for Predicting Direct Tensile Creep Fracture in Brittle Solids Containing Initial Microcracks

A Micro–macro Model of Pore Pressure Effect on Shear Fracture in Brittle Rocks under Compression

A Numerical Study of Brittle Failure in Rocks with Distinct Microcrack Characteristics