Abstract:Continuous casting is the most common method for producing steel into semi-finished shapes like billets or slabs. Throughout this process, steel experiences mechanical and thermal stresses, which influence its mechanical properties. During continuous casting, decreased formability in steel components leads to crack formation and failure. One reason for this phenomenon is the appearance of the soft ferrite phase during cooling. However, it is unclear under which conditions this ferrite is detrimental to the formability. In the present research, we investigated what microstructural changes decrease the formability of microalloyed steels during continuous casting. We studied the hot compression behaviour of microalloyed steel over temperatures ranging from 650 °C to 1100 °C and strain rates of 0.1 s-1 to 0.001 s-1 using a Gleeble 3800® (Dynamic Systems Inc, Poestenkill, NY, USA) device. We examined microstructural changes at various deformation conditions using microscopy. Furthermore, we implemented a physically-based model to describe the deformation of austenite and ferrite. The model describes the work hardening and dynamic restoration mechanisms, i.e., discontinuous dynamic recrystallisation in austenite and dynamic recovery in ferrite and austenite. The model considers the stress, strain, and strain rate distribution between phases by describing the dynamic phase transformation during the deformation in iso-work conditions. Increasing the strain rate below the transformation temperature improves hot ductility by reducing dynamic recovery and strain concentration in ferrite. Due to limited grain boundary sliding, the hot ductility improves at lower temperatures (<750 °C). In the single-phase domain, dynamic recrystallisation improves the hot ductility provided that fracture occurs at strains in which dynamic recrystallisation advances. However, at very low strain rates, the ductility decreases due to prolonged time for grain boundary sliding and crack propagation.

Rheological Behavior and Microstructure Evolution of Continuous Roll-Casting Process

Rheological Behavior of Continuous Roll Casting Process of Aluminum Alloy

Physical Simulation of Rheological Behavior and Stress-Strain Relation Evolvement in Continuous Roll-Casting Process

Physical Simulation of Roll-Casting Microstructure of Al Alloy

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Analysis of Casting Roll Temperature Distribution and Thermal Deformation in Twin-Roll Continuous Strip Casting

Numerical Simulation of Microstructure Evolution During Continuous Hot Rolling Process of GCr15 Steel Rod

Heat transfer and solidification microstructure evolution of continuously cast steel by non-steady physical simulation

Numerical simulation on recrystallization behavior and microstructure evolution during hot continuous rolling process of 38CrMoAl steel rod

Influence of Different Roll Casting Process Parameters on Casting Microstructure

Microstructural Evolution and Mechanical Properties of a Continuously Cast Al–Mg–Si–Cu Alloy Processed by Repetitive Continuous Extrusion Forming

Numerical Simulation and Experimental Investigation of Microstructure Evolution and Flow Behavior in the Rheological Squeeze Casting Process of A356 Alloy

Microstructure Simulation and Multi-physical Field Analysis of 400mm Thick Continuous Casting Slabs

Study on Numerical Simulation of Thermal-stress Direct-coupling in Twin-roll Continuous Casting of Aluminum Alloys

Study on the Creep Behavior and Microstructure Evolution of a Low Alloy Steel in Continuous Casting Processing

Influence of Rolling Speed on Temperature Field and Microstructure in Continuous Cast-rolling for Lead Strip

ANSYS-based Finite Element Simulation on Temperature Field of High-Speed Roll Casting Process

Modeling and simulating of the fast roll casting process

Effect of Roll Surface Profile on Thermal-Mechanical Behavior of Continuously Cast Bloom in Soft Reduction Process

The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels

Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation