Abstract:The solidification control is of extreme importance, because it strongly affects the final casting quality sanity. The structure obtained is generally not homogeneous and gives rise to great variations in composition, with position at small and large scales, which is known as segregation. An understanding of the way segregation occurs in continuous casting is of great importance for steels and in designing post-casting processes. As-cast structures are responsible the reduction in both scale and extension of segregation, because mass transport is dependent on the time required to diffuse a solute over a characteristic distance, e.g., the dendrite spacing that the characterizes the solidification structure. In this work, the effect of pouring temperature in steel slabs on the continuous casting processes are systematically investigated. Relationships between pouring temperature (PT) and center macrosegregation was qualitatively examined. Photomicrographs of specimen taken from transverse sections of steel slabs, shows that macrosegregation is strongly affected by pouring temperature (PT). For solute of carbon, phosphorus and sulfur, has been shown that the pouring temperature (PT) has a significant role on the resulting macrosegregation profiles, while that the elements as such silicon, manganese and aluminum, the said thermal parameter seems not able to affect its macrosegregation profiles. This is due to the fact that the solutes with lower partition coefficients favors segregation during the continuous casting process. It is shown for considered steels, the pouring temperature (PT) influences the position of the columnar to equiaxed transition (CET). Experimental results show that the end of the columnar region is abbreviated when lower pouring temperatures is used in continuous casting process. One can observe that as the pouring temperature (PT) increase in continuous casting process, the secondary dendritic arm spacing (λ2) increase, i.e., the dendritic morphology became coarsen.

Study on the Creep Behavior and Microstructure Evolution of a Low Alloy Steel in Continuous Casting Processing

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Influence of Prior Low Cycle Fatigue on Microstructure Evolution and Subsequent Creep Behavior

Characterization of the Cyclic Softening and Remaining Creep Behaviour of P92 Steel Weldment

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel

Study on Hot Sizing and Creep-Ageing Behavior of Al-Cu-Mn Cast Alloy

The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels

Analysis of Longitudinal Cracking and Mold Flux Optimization in High-Speed Continuous Casting of Hyper-Peritectic Steel Thin Slabs

The Microstructure Formation in Slag Solidification at Continuous Casting Mold

Microstructures and Creep Behavior of As-Cast TiAl-Nb Alloy

Prediction and Analysis on Formation of Internal Cracks in Continuously Cast Slabs by Mathematical Models.

In situ observation and investigation of effect of cooling rate on slab surface microstructure evolution in microalloyed steel

Heat transfer and solidification microstructure evolution of continuously cast steel by non-steady physical simulation

Analysis of the Creep Mechanism of Low-Alloy Steel in Terms of Plastic Deformation

A Crystal Plasticity-Based Creep Model Considering the Concurrent Evolution of Point Defect, Dislocation, Grain Boundary, and Void

Simulation and Study of Influencing Factors on the Solidification Microstructure of Hazelett Continuous Casting Slabs Using CAFE Model

Effect of Grade on Thermal–Mechanical Behavior of Steel During Initial Solidification

Effect of Continuous Casting Technology on Low-Alloy Steel Structure in Different Production Stages

Impacts of different designed microstructures on creep performance of a Ni-based wrought superalloy

An Experimental Investigation of Continuous Casting Process: Effect of Pouring Temperatures on the Macrosegregation and Macrostructure in Steel Slab