Abstract:The multitude of assembly methods for sandwich composites can be put into two categories: dry lamination and wet lamination. If the skins (metal, wood, plastic, FRP) are fabricated before laminating, the process is considered to be “dry.” On the other hand, if the facings are formed during assembly, laminated with the core, it is a “wet” process. Most large sandwich composite products are made by using reinforcing fabrics and thermosetting liquid resin in wet laminating processes. In this chapter, dry processes are introduced, including hot pressing, vacuum bagging, pinch roller pressing, and continuous pressing, to bond the facings and core into an integrated structure. Wet lamination, presented in the second section, combines the processes of wetting out the fiber reinforcement and bonding all the various layers together in one co-curing step. Wet lamination is conducted either in the open process by hand, by machines of chopping, spraying, and consolidating, or in a closed process, which includes vacuum infusion with or without positive pressure, resin transfer molding, and pultrusion. Prepreg may be considered wet or dry and may be combined with other processes such as infusion if the laminate will be cured at elevated temperatures. 3D printing is covered briefly in the last section as a new development for making sandwich structures by additive manufacturing. The multitude of assembly methods for sandwich composites can be put into two categories: dry lamination and wet lamination. In this chapter, introduces dry processes, including hot pressing, vacuum bagging, pinch roller pressing, and continuous pressing, to bond facings and core into an integrated structure. Compression molding of composite materials has been used for many years in composites applications. The main advantages of this process are very little material waste, its potential for automation, and its ability to mold large and fairly intricate parts. There are numerous methods for fabricating sandwich composite products. Some methods have been borrowed, but many were developed to meet specific sandwich design or manufacturing challenges. Closed molding was originally invented during early years of composite lamination since resins of that time suffered from cure inhibition when exposed to air. Maximizing the performance of thermoset composite materials requires, among other things, an increase in the fiber to resin ratio and removal of all air voids.

Discussion on Manufacturing Process of Unsymmetric Composite Laminates

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Application of Liquid Composite Molding Technology on Aeronautics

A Heat-Balance Method for Autoclave Process of Composite Manufacturing

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

A Study on Process-Induced Warpage of Curing Mold of Composite Structures

Experimental investigation of warpage in thin CF/PEKK composite laminates consolidated under non-isothermal conditions

Cured Deformation and Application of Unsymmetric Composite Thin Laminates

Warping Analysis in Laminated Object Manufacturing Process

Design Optimization of Molds for Autoclave Process of Composite Manufacturing

Manufacturing processes for composite materials and components for aerospace applications

Numerical and Experimental Studies on Cured Shape of Thin Unsymmetric Carbon/Epoxy Laminates

A mini review on manufacturing defects and performance assessments of complex shape prepreg-based composites

Experimental and numerical investigation on damage mechanism in asymmetric tapered laminates under tensile loading

Experimental Research on the Thermal-Consolidation Compound Forming of Thermosetting Fiber Metal Laminates Design for Complex Structures with Variable Curvature

Finite Element Modeling of Composites System in Aerospace Application

Design and manufacture of mould-free fibre-reinforced laminates with compound curvature

Laminating Processes of Thermoset Sandwich Composites

Numerical and Experimental Investigation of Wrinkling Pattern for Aerospace Laminated Membrane Structures