Numerical analysis of elastohydrodynamic lubrication for cycloid drives
Zhang-dong SUN,Cai-chao ZHU,Huai-ju LIU,Ming-yong LIU,Zong-lin GU
DOI: https://doi.org/10.13465/j.cnki.jvs.2014.23.035
2014-01-01
Abstract:Numerical analysis of grease elastohydrodynamic lubrication for cycloid drives was performed.The minimum film thickness of meshing process was obtained.Comparting it with that obtained from an empirical formula,the correctness of model was verified.The average radius of cycloid wheel's lubrication state was taken as the judgment basis, the effects of rotating speed,load and rheological index on grease EHL were analyzed.Results showed that with increase in rotating speed,the second pressure peak drops and moves toward the inlet,the film thickness increases;with increase in load,the contact field width increases,the second pressure peak rises and moves toward the out let,the film thickness decreases slightly;with increase in the rhoological index n,the second pressure peak firstly increases and then decreases, finally approaches Hertz pressure,and it moves toward the outlet,the film thickness decreases.The effect of the short ampliitude coefficient k1 on lubrication was discussed,it was shown that under the conditions to meet design requirements;the decrease in k1 can improve the lubrication performance.