Abstract:Performances of point contact EHL on multilayered or coated substrates have been analyzed in this paper via computer simulations, with emphasis on comparing the effects of Newtonian and non-Newtonian lubricants. The lubrication system consists of a rigid ball in contact with a smooth coated flat. The coating is perfectly bonded to an elastic substrate and it has a uniform thickness. The rigid ball has surface velocity U relative to the contact point. The hydrodynamic pressure p is governed by a generalized Reynolds equation in which the non-Newtonian effects of lubricants are characterized by two factors whose values are determined based on lubricant rheology. The Papkovich-Neuber potentials were employed to get the response functions in frequency domain for layered contact problems, and the influence coefficients relating pressure to surface displacements and stresses can be obtained via invert Fourier transform. The surface deformation was then calculated in terms of the pressure-displacement influence coefficients and the DC-FFT method was used to speed up the computation. The distributions of pressure, film thickness and subsurface stress have been analyzed for lubricants with different rheological behaviors, from which pressure and film thickness profiles along the rolling direction are calculated for Newtonian and Non-Newtonian lubricants. The central film thickness become thicker for stiffer coatings in the case of Newtonian lubricants, but the trend is reversed for Non-Newtonian lubricants. The surface stresses along the rolling direction show a spike corresponding to the pressure, which is more significant with stiffer coatings in the Newtonian case, but the spike is less visible for Non-Newtonian lubricants.

Numerical Analysis on Thermal Elastohydrodynamic Grease Lubrication in Line Contacts

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Elastohydrodynamic Lubrication Analysis on Line Contact Lubricated with Grease

Numerical thermal analysis of grease-lubrication in limited line contacts considering asperity contact

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller

Simulation Analysis for Lubrication State of the Thrust Washer Within Straight Planetary Gear Set

Numerical Analysis of Lubrication Property for Port Plate Pair of Axial Piston Pump

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

A Full Numerical Solution for the Thermoelastohydrodynamic Problem in Elliptical Contacts

Numerical Thermal Analysis of Greased Rolling Bearing Considering Surface Topography and Plastic Deformation

Deterministic Solutions and Thermal Analysis for Mixed Lubrication in Point Contacts

A Fast, Robust, Straightforward Algorithm for Thermal Elastohydrodynamic Lubrication

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

A Computer Thermal Model of Mixed Lubrication in Point Contacts

Numerical Analysis of Transient Elastohydrodynamic Lubrication of Helical Gears

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

Influence of Thermal Effects on Elastohydrodynamic (EHD) Lubrication Behavior at High Speeds

A Forward Iterative Numerical Method for Steady-State Elastohydrodynamically Lubricated Line Contacts

Numerical Analysis Of Point Contact Ehl On Coated Substrates

The Numerical Solution to Line Contact Elastohydrodynamic Problems under Heavy Load

Oil Film Velocity Analysis in the Thermal Elastic Hydrodynamic Lubrication of Heavy Loading Point Contact