Abstract:Thermoelastohydrodynamic lubrication (TEHL) analysis of line or point contacts is usually done by simultaneously and numerically solving the Reynolds equation, the Boussinesq equation of an elastic semi-infinite body, the energy conservation equation, and the load balance equation. Although a number of publications are available in this field, there is still a lack of general-purpose and widely used TEHL software for engineering applications. On the other hand, commercial software for both the solid structure and fluid flow analyses have become easy design tools. To expand the application of the commercial software to TEHL simulation, coupling of structure and fluid analyses is required. This study gives some demonstrations of the 3D finite element method (FEM) simulations of line contact TEHL problems using ANSYS version 13.0. The equilibrium equations of momentum and continuity and the energy conservation equation of lubricating fluids are solved with CFX. The elastic deformation of solids is calculated with the ANSYS Structure module. Through the fluid-solid coupling interfaces, the fluid pressure, solid deformation, and thermal flow are transferred between the fluid and solid domains. The computational fluid domain is enlarged, enclosing the contact zone, in the 3D model. Further, the 3D model can treat the realistic constraint conditions of solid deformation, whereas conventional TEHL analysis uses the assumption of semi-infinite body. The simulation results for pressure, lubricant film thickness, and temperature distributions are compared with the traditional Reynolds approach, and reasonable agreement for pressure and film thickness distributions has been obtained.

A Fast, Robust, Straightforward Algorithm for Thermal Elastohydrodynamic Lubrication

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Finite-Element Analysis of Aerostatic Lubrication with Porous Restrictors Based on Hypermesh

A fast calculation approach for elastohydrodynamic finite line contacts applicable to online calculations of rolling bearing models

A Forward Iterative Numerical Method for Steady-State Elastohydrodynamically Lubricated Line Contacts

A Computer Thermal Model of Mixed Lubrication in Point Contacts

A Generalized Reynolds-Equation for Non-Newtonian Thermal Elastohydrodynamic Lubrication

Deterministic Solutions and Thermal Analysis for Mixed Lubrication in Point Contacts

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

A New Thermal Elasto-Hydrodynamic Lubrication Solver Implementation in OpenFOAM

A Full Numerical Solution for the Thermoelastohydrodynamic Problem in Elliptical Contacts

Comparisons of TEHL Simulations of Newtonian Fluids in Line Contacts Between the 3D FEM and the Reynolds Equation–Based Approaches*

Supervised Adaptive Method for Robust and Fast Solving of Lubrication Problems

Lubrication Of Nonconformal Contacts

A Computer Program Package for the Prediction of Ehl and Mixed Lubrication Characteristics, Friction, Subsurface Stresses and Flash Temperatures Based on Measured 3-D Surface Roughness

A Mixed Elastohydrodynamic Lubrication Model With Asperity Contact

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

A Simplified One-Dimensional Thermal Model for Journal Bearings

Effective Finite Difference Method to Calculate Lubricating Performances of Ultra-Thin Gas Film of Magnetic Head/disk

A fully coupled finite element solution for the mixed elastohydrodynamic lubrication of finite line contacts

Finite element analysis of transient thermomechanical rolling contact using an efficient arbitrary Lagrangian–Eulerian description